Related Manuals for Hulk HU6511
Summary of Contents for Hulk HU6511
- Page 1 HU6511 l i t h i u m - i o n j u m p s ta r t e r P O R T A B L E E M E R G E N C Y P O W E R...
- Page 2 c a u t i o n Please read the user manual carefully and use the product correctly based on the user manual so that you can be familiar with the product more conveniently and quickly!
-
Page 3: Technical Specifications
TECHNICAL SPECIFICATIONS Capacity: 66.6 Wh Dimensions: 183 (L) x 119 (W) x 45.6 mm (H) Weight: 2kg Battery: Lithium-Ion Output voltage: 12V to 19V Output ports: USB -5V 2.1A Auto jump starter -12V Electronic - 12/19V 3.5A Input Charging Ports: 3.5mm -18V 1.5A Start current: 1200A Peak Current: 2000A Operating Temperature: -20˚C to +60˚C... -
Page 4: Important Safety Information
IMPORTANT SAFETY INFORMATION PLEASE read this entire manual before attempting to use the product. WARNING: 1. Do not damage, drop or crush this item. Do not attempt to use the jump starter if it has been damaged in any way. 2. - Page 5 WARNING: Warning. Always properly ventilate the area before attempting to start the engine, hook up a Jump starter or start the jump starting process DO NOT use this product near or in the presence of propane tanks, natural gas or any other explosive fumes that may accumulate, especially in low or enclosed areas.
-
Page 6: General Information
GENERAL INFORMATION The HULK Professional Series HU6512 Jump Start is capable of starting Diesel engines up to 7L & Petrol engines up to 10L. Compatible With: The HULK Professional Series Jump Starter has 66.6wh of capacity for charging laptops, mobile phones, portable gaming devices, MP3/MP4 players, cameras, tablets and other electronic devices. - Page 7 Note: Full recharge of the unit should take between 4-6 hours depending upon battery level. We recommend charging the unit every 6 months for optimum performance. LED Flashlight Operation: Press and hold the power button (4) for three seconds to turn on the fashlight. Press the power button (4) again for slow flash and again for SOS fast flash.
-
Page 8: Product Features
PRODUCT FEATURES LED display Flashlight Battery terminal socket Power button 19V - 3.5A output 5V - 2.1A output 12V - 4A output 18V/1.5A input Power ON/OFF FUNCTION ON SMART BATTERY JUMPER CABLE 1. Reverse polarity connection: Solid Red LED with fast 2 short beep. 2. -
Page 9: Package Contents
PACKAGE CONTENTS Carry Case Jumper Cables Laptop Adaptors Power Adaptor 3 in 1 Mobile Adaptor Car Charger... - Page 10 QUICK START GUIDE: JUMP STARTER Before attempting to jump start your vehicle, please read your vehicle owners manual to insure there are no specific steps needed. DO NOT crank the engine for more than 4 continuous seconds while the unit is connected to the battery.
-
Page 11: Jump Starting A Vehicle
JUMP STARTING A VEHICLE 1. Refer to your vehicle’s owners manual for proper jump start location. 2. Check the battery terminals to ensure they are clean and free from any debris for best connection. 3. Identify the positive “+” and negative “-” terminals of the battery before connecting the clamps. -
Page 12: Warranty Information
WARRANTY INFORMATION • We offer a limited warranty for this product against any defects in material and workmanship for a period of 12 months from the date of purchase by the end user/consumer. Return to the place of purchase for warranty or repairs. The conditions of the warranty are as follows: •... - Page 13 Warranty Card ONE YEAR LIMITED WARRANTY Model Serial NO. Purchase Date Maintenance Date Customer Name Address Seller Description of Product...
- Page 14 Caution: Please read the user manual carefully Manufactured and Packaged for Automotive Imports Pty Ltd 22 – 28 Lexton Road, Box Hill Victoria, Australia AUS: www.hulk4x4.com.au www.hulk4x4.co.nz...
Need help?
Do you have a question about the HU6511 and is the answer not in the manual?
Questions and answers