Table of Contents
Advertisement
6
Servicing and maintenance
6.1
General care
CAUTION
Access to the electrical installation is strictly reserved to authorized maintenance
technicians.
The Speedgate Swing Slim must be cleaned and greased at regular intervals, using the following ap-
proved materials in order to ensure a constant functioning and to extend service life.
Routine cleaning, all finishes
Cleaning agent: Soap or mild detergent water.
Action: Sponge rinse with clean water, wipe dry as necessary.
Stubborn stains and discolouration, all finishes
Cleaning agent: Mild cleaning solutions or domestic service cleaners.
Actions: Rinse well with clean water and wipe dry.
Oil, Grease marks, all finishes
Cleaning agent: Organic solvents (acetone, alcohol, genclene, trichlorethane).
Action: Clean after with soap and water, rinse well with clean water and wipe dry.
Rust and other Corrosion products, Stainless finishes
Cleaning agent: Oxalic acid. The cleaning solution should be applied with a swab and allowed to
stand for 15 to 20 minutes before being washed away with water. Continue using a domestic surface
cleaner to give a final clean.
Action: Rinse well with clean water (precautions for acid cleaners should be observed).
Minor scratches on painted surfaces
Cleaning agent: Lightly rub with cutting paste. Rinse area with water and dry. Apply touchup paint in
fine layers.
Action: Allow 2 weeks to harden. Blend into surrounding paint work, using fine cutting paste
Deep scratches on painted finishes causing rust
Cleaning agent: Remove rust with a small sharp knife. Apply rust inhibiting paint. Fill scratch with fine
body filler to just under finished surface. Follow procedure for minor scratches.
Greasing
This action is carried out by the Service Engineer during service visits.
BAL_Speedgate_slide_EN_1V0_REC_102-905401041
Servicing and maintenance
6
17 / 26
Advertisement
Table of Contents
