Applying the
Step 1:
Measure the stoma and select the products
Step 2:
Apply the SUR-FIT Natura
Adaptor to the skin barrier
system
Measure the stoma with a stoma measuring guide
I
Select the proper size ConvaTec Moldable Technology
I
skin barrier, SUR-FIT Natura
SUR-FIT Natura
®
Coupling ring sizes should all be the same
I
NOTE:
When removing the skin barrier from the package,
DO NOT remove the clear release liner on the circular
adhesive or the white release paper from the flexible
fabric collar.
Attach the SUR-FIT Natura
I
to the ConvaTec Moldable Technology
by aligning the coupling ring flange on the skin barrier
with the coupling ring on the adaptor
Press the two coupling rings together, beginning
I
at the bottom. Follow the edge of the rings with your
fingers, snapping the rings together. Several "clicks"
may be heard
®
Low-Pressure Adaptor, and
drainable pouch
®
Low-Pressure
®
Low-Pressure Adaptor
™
™
skin barrier
Need help?
Do you have a question about the SUR-FIT Natura and is the answer not in the manual?