Charge Your Phone; Switch On And Set Up Your Phone - Nokia 2.2 User Manual

Nokia 2.2 User Guide
2. Slide the nano-SIM in slot 1 with the contact area face down. If you have a dual-SIM phone,
slide the second SIM in slot 2.
3. If you have a microSD memory card, slide the card in the memory card slot.
To remove the SIM1 card, slide the lever in the SIM1 slot to the left and remove the card. To
remove the SIM2 and memory cards, just slide them out.
Use only original nano-SIM cards. Use of incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Use only compatible memory cards approved for use with this device. Incompatible cards may
damage the card and the device and corrupt data stored on the card.
Important: Do not remove the memory card when an app is using it. Doing so may damage
the memory card and the device and corrupt data stored on the card.
Tip: Use a fast, up to 400 GB microSD memory card from a well-known manufacturer.

CHARGE YOUR PHONE

Charge the battery
1. Plug a compatible charger into a wall outlet.
2. Connect the cable to your phone.
Your phone supports the USB micro-B cable. You can also charge your phone from a computer
with a USB cable, but it may take a longer time.
If the battery is completely discharged, it may take several minutes before the charging
indicator is displayed.

SWITCH ON AND SET UP YOUR PHONE

When you switch your phone on for the first time, your phone guides you to set up your
network connections and phone settings.
© 2020 HMD Global Oy. All rights reserved. 8