Schartec SPCM Manual page 4

Installation
1. Remove the
cover
4. Fasten the cover
with the screw below
7. Attach the bracket flat on the
surface.
Schartec photocells meet the requirements of the applicable European and national guidelines. The conformity has been proven, the corresponding declarations,
certificates, test reports and documents are deposited with the manufacturer and can be requested if required.
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered to appropriate acceptance
The complete version of the battery law can be found here: http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
2. Connect the cables
5. Attach the
template to the
desired location
8. Attach and slide the photocell
downwards to fasten it in place.
Declaration of Conformity (CE)
Information about battery regulation
and collection points.
3.Fasten the cover again
6. Drill the holes and
insert the dowels