Table of Contents
Advertisement
Quick Links
Q U I C K S T A R T
Carefully unpack box.
1
START HERE
What's what?
Important components labeled
9-V Battery
Must be installed before use.
Internal wiring not shown for clarity.
G U I D E
Make sure you have all items shown here. (Screwdriver not shown)
2
Keypad Unit
Keypad Unit
Back of front panel shown.
Transceiver
9-V Battery
Reset Button
For performing reset procedures
on keypad
Connection Terminals
For wiring to compatible
AC/DC power source and
gate operator or door opener
Relay Status LED
Indicates whether relay is
active or inactive
(Relay active when lit)
Internal wiring not shown for clarity.
Key
Carriage Bolt
Hex Nut
( 4x )
( 4x )
Power LED
Indicates whether or not unit has power
Programming Button
For pairing transceiver to keypad
Programming LED
Indicates status of pairing process
Transceiver
Shown with cover removed.
1 of 6
14-500
Model
Hole Plug
Adhesive
Mounting Pad
Advertisement
Table of Contents
Related Manuals for Security Brands RIDGE 2.0
Summary of Contents for Security Brands RIDGE 2.0
- Page 1 1 of 6 Q U I C K S T A R T G U I D E 14-500 Model Carefully unpack box. Make sure you have all items shown here. (Screwdriver not shown) START HERE Keypad Unit Transceiver 9-V Battery Carriage Bolt Hex Nut Hole Plug...
- Page 2 Terminals vary widely across Terminals vary widely across Power Source Power Source manufacturers and models. manufacturers and models. (Not Included) (Not Included) ALWAYS USE SAFETY DEVICES! © 2021 Security Brands, Inc. All rights reserved. QSG-14500-EN Rev. C (4/2021)
- Page 3 3 of 6 Q U I C K S T A R T G U I D E 14-500 Model Remove transceiver cover; then Pair keypad unit with transceiver by While pairing, keypad unit will beep and flash. hold down Programming button on entering sequence below on keypad.
- Page 4 (1251 is default) (On: 1 beep; (1251 is default) Off: 2 beeps) NOTE: Green arrow indicates “good” tone on keypad unit. Always wait for good tone before moving on. © 2021 Security Brands, Inc. All rights reserved. QSG-14500-EN Rev. C (4/2021)
- Page 5 5 of 6 Q U I C K S T A R T G U I D E 14-500 Model Programming Sub Modes Reset Procedures NOTE: If an error is made during these procedures, an “error” tone will sound and Add Access Code(s) to Channel A Add One-Time-Use Code (Channel A) you must start again from the beginning.
- Page 6 Q U I C K S T A R T G U I D E 14-500 Model Notes Ridge 2.0 14-500 NEED HELP Call (972) 474-6390 Email techsupport@securitybrandsinc.com We are available Mon–Fri / 8am–5pm Central © 2021 Security Brands, Inc. All rights reserved. QSG-14500-EN Rev. C (4/2021)
Need help?
Do you have a question about the RIDGE 2.0 and is the answer not in the manual?
Questions and answers