Subscribe to Our Youtube Channel
Related Manuals for Addi-Data ADDICOM PA 7300
Summary of Contents for Addi-Data ADDICOM PA 7300
- Page 1 Technical support: +49 (0)7223 / 9493-0 Technical description ADDICOM PA 7300 1-port serial interface edition 09/1999...
- Page 2 - this software can only be used for configuring ADDI-DATA boards. - copying the software is forbidden (except for archiving/ saving data and for replacing defective data carriers) - deassembling, decompiling, decoding and reverse engineering of the software are forbidden.
- Page 3 W A R N I N G In case of wrong uses and if the board is not used for the purpose it is intended for: people may be the board, PC and the environment injured peripheral may be may be destroyed polluted «...
- Page 4 Declaration of Conformity This declaration is valid for the following product: ADDICOM PA 7300 1-port serial interface with/without galvanic separation plug & play, modular structure through SI modules It is made by ADDI-DATA GmbH Meß- und Steuerungstechnik Dieselstraße 3 D-77833 Ottersweier...
-
Page 5: Table Of Contents
Table of contents PA 7300 INTENDED PURPOSE OF THE BOARD ............1 Limits of use......................3 USER ....................4 Qualification ...................... 4 Personal protection .................... 4 HANDLING THE BOARD ...............5 TECHNICAL DATA................6 Electromagnetic compatibility (EMC) ..............6 Physical set-up of the board ................6 Limit values...................... - Page 6 PA 7300 Table of contents CONNECTING THE PERIPHERAL............24 Connector pin assignment ................24 Connection examples ..................25 6.2.1 Cabling RS232 ......................25 6.2.2 Cabling RS422 ......................25 6.2.3 Cabling RS485 ......................26 6.2.4 Cabling 20 mA Current Loop..................27 REPLACING THE SI MODULES ............29 DEVICE DRIVER ................
- Page 7 Figures and tables PA 7300 Figures Fig. 1-1: Combination of the basic board with SI modules............ 1 Fig. 3-1: Wrong handling....................... 5 Fig. 3-2: Correct handling...................... 5 Fig. 5-1: Types of slots ......................10 Fig. 5-2: Opening the protective blister pack ..............10 Fig.
-
Page 8: Intended Purpose Of The Board
Technical description Chapter 1 PA 7300 INTENDED PURPOSE OF THE BOARD The board PA 7300 provides the personal computer (PC) with an asynchronous serial interface for the communication with external devices. The operating mode depends on the version of the basic board PA7300 and on the SI modules installed. -
Page 9: Table 1-1: Intended Purpose Depending On The Operating Mode
PA 7300 Technical description Chapter 1 The intended purpose of the board depends on the operating mode used. Table 1-1: Intended purpose depending on the operating mode Operating Port Distance Environment Module mode configuration between transmitter and receiver modem control signals PM232 RS232 connected on the board... -
Page 10: Limits Of Use
Technical description Chapter 1 PA 7300 Limits of use The use of the board in a PC could change the PC features regarding noise emission and immunity. Increased noise emission or decreased noise immunity could result in the system not being conform anymore. If the basic board PA7300 is used with galvanically separated SI modules, then the creeping distance of 3.2 mm to the RS232 peripheral lines which are not galvanically separated is not ensured anymore. -
Page 11: User
PA 7300 Technical description Chapter 2 USER Qualification Only persons trained in electronics are entitled to perform the following tasks: Installation, • putting into operation, • use, • maintenance. • Personal protection Consider the country-specific regulations about the prevention of accidents •... -
Page 12: Handling The Board
Technical description Chapter 3 PA 7300 HANDLING THE BOARD Fig. 3-1: Wrong handling Fig. 3-2: Correct handling... -
Page 13: Technical Data
PA 7300 Technical description Chapter 4 TECHNICAL DATA Electromagnetic compatibility (EMC) The board has been subjected to EMC tests in an accredited laboratory in accordance with the norms EN50082-2, EN55011, EN55022. The board complies with the limit values set by the norm EN50082-2 as follows: True value Set value ESD .............. -
Page 14: Limit Values
Technical description Chapter 4 PA 7300 Limit values Operating temperature: ........0 to 60°C Storage temperature: ........-25 to 70°C Relative humidity: ........... 30% to 99% non condensing Minimum PC requirements: - operating system: ........... MS DOS 3.3 or > Windows 3.1 - bus speed: ............ - Page 15 PA 7300 Technical description Chapter 4 PM232 CCITT recommendation..... V.24 US norm EIA ........RS232 max. transfer rate ........ 112 kBd PM232-G CCITT recommendation..... V.24 US norm EIA ........RS232 max. transfer rate ........ 19200 Bd Creeping distance ....... 3.2 mm Test voltage.........
-
Page 16: Installation
Technical description Chapter 5 PA 7300 INSTALLATION IMPORTANT! If you want to install SIultaneously several ADDI-DATA Plug & Play boards, consider the following procedure. Install and configure the boards one after the other. • You will thus avoid configuration errors. -
Page 17: Inserting The Board
PA 7300 Technical description Chapter 5 Inserting the board IMPORTANT! Do observe the safety instructions. 5.1.1 Opening the PC Switch off your PC and all the units connected to the PC. • Pull the PC's mains plug from the socket. •... -
Page 18: Closing The Pc
Technical description Chapter 5 PA 7300 Fig. 5-3: Inserting the board Fasten the board to the rear of the PC housing with the screw • which was fixed on the back cover. Fig. 5-4: Fastening the board at the back cover Tighten all the loosen screws. -
Page 19: Installing The Software
The CD contains: - ADDIREG for Windows NT 4.0 and Windows 95, You can also download the ADDIREG program from Internet. - Standard software for the ADDI-DATA boards: - 16-bit for MS-DOS and Windows 3.11 - 32-bit for Windows NT/95. -
Page 20: Configuring The Board With Addiset
In the directory ADDISET, type <ADDISET>. The parametering program for the board PA 7300 is loaded. ADDISET lists automatically all the plug & play ADDI-DATA boards which are plugged in your PC. They appear in the board list in the order in which they have been detected by the chain of characters identifying the board. -
Page 21: Configuration
PA 7300 Technical description Chapter 5 5.3.2 Configuration Configuring the base address and the interrupt line Select a free base address and if necessary a free interrupt line. Configuring the ports at COM1, 2, 3 or 4 Klick on the wished button (Init COM1-2-3 or -4) The related interrupt line and base address will be selected. -
Page 22: Storing The Configuration
Technical description Chapter 5 PA 7300 5.3.3 Storing the configuration You store the configuration with the option Save or Save as from the File Menu. You can create several configuration files 5.3.4 Define the "boot file" (initialization file) You define the configuration file you have stored before as a "boot file" (command Set Boot file from Menu Option). -
Page 23: Modifying The Configuration After Having Booted The Pc
ADDIREG program. 5.5.1 Program description IMPORTANT! Insert the ADDI-DATA boards to be registrated before starting the ADDIREG program. If the board is not inserted, the user cannot test the registration. Once the program is called up, the following dialog box appears. -
Page 24: Fig. 5-6: Addireg Registration Program
The base address selected with the ADDIREG program must correspond to the one set through DIP-switches. Access: Selection of the access mode for the ADDI-DATA digital boards. Access in 8-bit or 16-bit. PCI bus / slot: Used PCI slot. If the board is no PCI board, the message "NO" is displayed. - Page 25 PA 7300 Technical description Chapter 5 ISA DMA: Indicates the selected DMA channel or "Not available" if the board uses no DMA. More information: Additional information like the identifier string (eg.: PCI1500-50) or the installed COM interfaces. Text boxes: Under the table you will find 6 text boxes in which you can change the parameters of the board.
-
Page 26: Fig. 5-7: Configuring A New Board
Technical description Chapter 5 PA 7300 Fig. 5-7: Configuring a new board All boards you can registrate are listed on the left. Select the wished board. (The corresponding line is highlighted). On the right you can read technical informations about the board(s). Activate with "OK";... -
Page 27: Fig. 5-8: Communication Board
Fig. 5-8: Communication board If you use the standard driver for Windows, you can select the COM number. If you use the ADDI-DATA driver, you can select the identifier string for each module. Several options like "Module selection" and the different parameters can only be activated if the functions are available. -
Page 28: Registrating A New Board
Technical description Chapter 5 PA 7300 5.5.2 Registrating a new board IMPORTANT! To registrate a new board, you must have administrator rights. Only an administrator is allowed to registrate a new board or change a registration. • Call up the ADDIREG program. The figure X-X is displayed on the screen. Click on "Insert". -
Page 29: Removing The Addireg Program
Windows registry are deleted. Error analysis per Internet Do not hesitate to visit us or e-mail your questions. Our Internet page is accessed: - per e-mail: info@addi-data.de hotline@addi-data.de - per Internet : http://www.addi-data.de. http://www.addi-data.com Free driver downloads You can download the latest version of the device driver for the board PA 7300 from the Internet. -
Page 30: Operating Systems With Plug & Play Functions
Technical description Chapter 5 PA 7300 Operating systems with Plug & Play functions Windows 95,Windows NT Presetting after RESET RS 232 modem control signals external on connector RS 485 without echo automatic transmitter control with receiver and transmitter rest state current... -
Page 31: Connecting The Peripheral
PA 7300 Technical description Chapter 6 CONNECTING THE PERIPHERAL Connector pin assignment Fig. 6-1: 25-pin SUB-D male connector... -
Page 32: Connection Examples
Technical description Chapter 6 PA 7300 Connection examples 6.2.1 Cabling RS232 Fig. 6-2: Cabling RS232 The connections are not necessary when the modem control signals are connected on the board (See chapter 5 Installation). 6.2.2 Cabling RS422 Terminal resistor: 100 Ω Ω Ω Ω Fig. -
Page 33: Cabling Rs485
PA 7300 Technical description Chapter 6 6.2.3 Cabling RS485 Terminal resistor: 120 Ω Ω Ω Ω Fig. 6-4: Cabling RS485 Fig. 6-5: Multipoint system... -
Page 34: Cabling 20 Ma Current Loop
Technical description Chapter 6 PA 7300 6.2.4 Cabling 20 mA Current Loop Active / passive : When a transmitter and a receiver communicate, one of them has to supply the necessary current. If the transmitter supplies the current, it is active. -
Page 35: Fig. 6-9: Passive Transmission / Passive Reception
PA 7300 Technical description Chapter 6 Fig. 6-9: Passive transmission / passive reception Fig. 6-10: Connection to a Siemens S5 SPS... -
Page 36: Replacing The Si Modules
Technical description Chapter 7 PA 7500 REPLACING THE SI MODULES IMPORTANT! We advise you to send us the board if a module is to be replaced. If you wish to effect the replacement yourself, consider the following: - Do observe the Security advices - Insert/remove the module carefully according to the following illustrations. -
Page 37: Fig. 7-3: Component Scheme Of The Basic Board
PA 7300 Technical description Chapter 7 Fig. 7-3: Component scheme of the basic board... -
Page 38: Device Driver
Technisches Referenzhandbuch Kapitel 8 PA 7300 DEVICE DRIVER To install the ports of the PA 7300 please use the standard drivers which are delivered with Windows NT 4.0. You can read additional information about the Windows API functions for the settings and the use of the serial interfaces in: „SERIAL COMMUNICATION in WIN32“... -
Page 39: Index
Index PA 7300 INDEX 20 mA current loop Internet active transmission / active reception 26 error analysis 22 active transmission / passive reception 26 limit values 7–8 passive transmission / active reception 26 energy requirements 7 passive transmission / passive reception 27 multipoint system 25 ADDIREG changing the configuration 21...
Need help?
Do you have a question about the ADDICOM PA 7300 and is the answer not in the manual?
Questions and answers