Page 1
FRD-55 / FRD-100 Remote Display LED Short Manual Flintec GmbH Bemannsbruch 9 74909 Meckesheim GERMANY www.flintec.com...
Page 2
The letter „P“ will appear if the communication is correct. 2. Prepare the connections connector And connect FRD100 to your PC 3. The remote display supports Flintec protocol for FAD-30, FAD- 40,0 FT-1x, FT-11x devices. Flintec Protokoll: <STX>Daten<CR><CHK> Functions: Decimal, Gross/Net, motion, positive/negative and overload...
Page 3
The settings must be sent to the remote display. During FRDreceiving the data on the display appears „1“- sign. Disconnect the com port. FRD will automatically start. During the start-up the following date will be displayed: Serial port data, like comport, baud rate, parity, protocol No- „026“ and „FLINT“. Connect FRD to your FT-1x Serial port RS232 FRD-DisplayConnectorX2...