Hyundai Sonata Hybrid 2017 Owner's Manual page 69

To release your seat belt:
Press the release button (1) in the
locking buckle.
When it is released, the belt should
automatically draw back into the
retractor. If this does not happen,
check the belt to be sure it is not twist-
ed, then try again.
Pre-tensioner seat belt
(Driver and front passenger)
ODH033057
Your vehicle is equipped with driver's
and front passenger's Pre-tensioner
Seat Belts. The purpose of the pre-
tensioner is to make sure the seat
belts fit tightly against the occupant's
body in certain frontal collisions. The
pre-tensioner seat belts may be acti-
vated in crashes where the frontal col-
lision is severe enough, together with
the air bags.
When the vehicle stops suddenly, or
if the occupant tries to lean forward
too quickly, the seat belt retractor will
lock into position. In certain frontal
collisions, the pre-tensioner will acti-
vate and pull the seat belt into tighter
contact against the occupant's body.
•
Always wear your seat belt and
sit properly in your seat.
•
Do not use the seat belt if it is
loose or twisted. A loose or
OLMB033039
twisted seat belt will not pro-
tect you properly in an acci-
dent.
•
Do not place anything near the
buckle. This may adversely
affect the buckle and cause it
to function improperly.
•
Always replace your pre-ten-
sioners after activation or an
accident.
•
NEVER inspect, service, repair
or replace the pre-tensioners
yourself. This must be done by
an authorized HYUNDAI dealer.
WARNING
(Continued)
2-29
2