Advertisement
Table of Contents
- 1 Instructions for Installing CMU Blocks for Mason-Lite® Fireplaces
- 2 Preparing Your Fireplace for CMU Barrier on Combustible Flooring
- 3 6 Inch CMU Required
- 4 8 Inch CMU Required
- 5 1/2” Cement Board Required on All Units (Not Supplied)
- 6 CMU Blocks Must be Properly Secured to Flooring
- Download this manual
Instructions for Installing CMU Blocks for Mason-Lite® Fireplaces
NOTE: This installation is intended for fireplaces built in non-seismic areas. No rebar is required.
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE INJURY,
PROPERTY DAMAGE OR LOSS OF LIFE.
REFER TO THIS AND YOUR FIREPLACE MANUAL. FOR ASSISTANCE OR ADDITIONAL INFORMATION, CON-
SULT A QUALIFIED INSTALLER OR LOCAL DISTRIBUTOR.
IMPORTANT: CONSULT YOUR LOCAL CODES PRIOR TO INSTALLING. THIS INSTRUCTION GUIDE IS INTEND-
ED FOR THE INSTALLATION OF ASTM C 90 CMU BLOCKS.
rev 05/27/2014
WARNING:
Do not store gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
Advertisement
Table of Contents
Related Manuals for mFi Mason-Lite MFP33
Summary of Contents for mFi Mason-Lite MFP33
- Page 1 Instructions for Installing CMU Blocks for Mason-Lite® Fireplaces NOTE: This installation is intended for fireplaces built in non-seismic areas. No rebar is required. WARNING: IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE OR MAINTENANCE CAN CAUSE INJURY, PROPERTY DAMAGE OR LOSS OF LIFE. REFER TO THIS AND YOUR FIREPLACE MANUAL.
- Page 2 6 inch CMU required 8 inch CMU required Preparing your fireplace for CMU barrier on Combustible Flooring After determining the location of your fireplace, lay out your CMU blocks per the diagram above corresponding to your model fireplace. Note that for models MFP63 and MFP43ST, 8 inch high CMU blocks are required.
Need help?
Do you have a question about the Mason-Lite MFP33 and is the answer not in the manual?
Questions and answers