Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nordic CHS-B0136
Summary of Contents for Nordic CHS-B0136
- Page 1 36V BRUSHLESS CHAINSAW OPERATING MANUAL CHS-B0136...
-
Page 2: Product Specification
NORDIC PLEASE READ THIS MANUAL BEFORE OPERATION TO PREVENT RISK OF INJURY OR IMPROPER USE. PLEASE NOTE IMAGES IN THIS MODEL REFLECT A SIMILAR CHAINSAW AND NOT THE FINAL PRODUCT SOME SLIGHT VARIATIONS IN DESIGN MAY OCCUR. PRODUCT SPECIFICATION Voltage:... -
Page 3: Working Area
NORDIC 2.1 WORKING AREA • Keep work area clean and well lit. Cluttered and dark areas invite accidents. • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. - Page 4 NORDIC tool. Loose clothes, jewelery or long hair can become entangled in the moving parts.. • If there are devices for connecting dust extraction and collection facilities, please ensure that they are attached and used correctly. Using such devices can reduce dust-related hazards.
- Page 5 NORDIC electric shock. • Wear safety glasses and hearing protection. Further protective equipment for head, hands, legs and feet is recommended. Adequate protective clothing will reduce personal injury by flying debris or accidental contact with the saw chain. • Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree may result in personal injury.
-
Page 6: Important Safety
NORDIC • Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the chain saw in unexpected situations. • Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may cause chain breakage and/or kickback. -
Page 7: Intended Use
NORDIC • Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal directly or via accidental contact with metallic objects, the battery is short circuited and an intense current will flow causing heat generation which may lead to casing rupture or fire. - Page 8 NORDIC SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use Wear eye protection Wear ear protection Wear safety gloves In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated;...
-
Page 9: Battery Charger
NORDIC ASSEMBLY Before using the equipment: BATTERY CHARGER The lithium-ion battery can be charged at any time and will not develop a “memory” when charged after only a partial discharge. It is not necessary to run down the battery pack charge before recharging. Remove the battery pack from the tool when convenient for you and your job. - Page 10 Be sure to read the following information before you put the cordless equipment into operation: • Charge the battery pack with the charger. An empty battery pack requires a charging period of approximately 0.5 to 1 hour. NORDIC Chain saw assembly Note: After unpacking, check the contents for completeness and possible transport damage.
- Page 11 To do so switch the devic the guide bar in the centre of the guide bar. 3.Place the guide bar with the elongated hole on the stud bolt and guide bolt on the chainsaw. NORDIC brake. Run the saw chain around the chain wheel.
-
Page 12: Checking The Chain Brake
NORDIC COMMISSIONING CHAIN BRAKE WARNING! Original Instructions Always check that the chain brake is working properly before use. If not, do not use the chainsaw and have • Tilt the hand guard in the direction of the guide bar tip. -
Page 13: Checking The Chain Lubrication
• Check the oil level on the basis of the oil level indicator. Refilling the chain oil CAUTION! NORDIC • Only add environmentally friendly, good quality chain lubricating • Do not add used oil. Used oil can cause skin cancer with extend is damaging to the environment! Used oil does not have the nece and is unsuitable for chain lubrication. -
Page 14: Operation
NORDIC OPERATION ATTENTION! Do not operate the chainsaw with a defective or badly worn cutting device. WARNING! Familiarize yourself with the chainsaw sawing technique in detail before use (see “Basic working technique”). Risk of injury! Never allow children to operate the chainsaw. Do not allow persons to use the chainsaw, ... -
Page 15: After Use
NORDIC • Exert regular pressure on the device and do not apply excessive force. • If possible, apply the device to the branch you wish to saw with the claw stop. ATTENTION! If the cutting device touches a foreign body, or the operation noise intensifies, or the ... -
Page 16: Felling A Tree
If the guide bar tilts, the device may be jerked towards the user balance the backward force of the saw chain with their body stre of the guide bar will remain in contact with the wood and kickba NORDIC Risk of death or serious injuries! Felling a tree ... -
Page 17: Removing Branches
Original Instructions NORDIC bottom to top , and then saw through from the top. FALLEN TRUNKS We recommend supporting trunks on a sawhorse when sawing through them. If this is not possible, the trunk should Risk of injury! be lifted with the aid of supporting boughs or with support Do not saw trunks that are strained! Splitting wood or a tilted blocks and supported. -
Page 18: Re-Tightening The Saw Chain
NORDIC CLEANING AND MAINTENANCE OVERVIEW After every use,clean the device. Regularly, depending on the conditions of use: • Re-tighten the saw chain. • Clean guide bar oil guide groove. • Sharpen the saw chain. • Check the saw chain oil level, top up if necessary. -
Page 19: Service Information
NORDIC SERVICE INFORMATION Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables, STORAGE Empty the oil Screw off the oil tank cap. - Page 20 NORDIC Rear handle Guide bar PLEASE NOTE: Battery & Charger sold separately. ON/OFF switch Hand guard/chain brake Lock Switch Front handle Saw chain Chain tensioning wheel...
Need help?
Do you have a question about the CHS-B0136 and is the answer not in the manual?
Questions and answers