Page 2
DL-422 dienen zur Verbindung von RS422- System d-light DL-422 allows the connection of RS422 interfaces by using Schnittstellen über Lichtwellenleiterstrecken. Sie besitzen zwei Versorgungs- fiber optic systems spannungseingänge, so dass sie redundant mit Spannung versorgt werden können. Ein integriertes Fehlerrelais kann verwendet werden, um auftretende d-light DL-422/2X allows drop-mode with half-duplex-transmission.
Page 3
Bedienungsanleitung d-light DL-422 und DL-422/2X Abmessungen / Dimensions 115 mm 61 mm 61 mm V DC 1 VDC 1 FA I L FA I L Status Status Status Status Status DL-422 DL-422/2X Anschluss und Betriebsarten / Connectors and Operation Modes...
Page 4
Transmission rate max. divided by the number of fibre-segments Vollduplex, halbduplex mit DL-422/2x Übertragungsart Full duplex, half duplex only with DL-422/2x Transmission schaltbar: offen oder Pull-Up Widerstand (Rp) oder Wellenwiderstand (Rw) Abschlusswiderstand switchable termination: open, Pull-Up (Rp) or characteristic impedance (Rw) Load Anschlusslänge...
Need help?
Do you have a question about the DL-422 and is the answer not in the manual?
Questions and answers