HANBAY Inc User Manual RDx-B-xxxDT-10.31 Battery Fail Safe Wiring: Wiring schematic for RDx-B-xxxDx-10.31: Terminal # DC Power Supply only 6-> +24VDC 5-> Power Gnd For R-series non explosion rated. 4 -> Output TTL2 3-> Output TTL1 2-> Input TTL2 1->...
HANBAY Inc User Manual RDx-B-xxxDT-10.31 Battery Fail Safe Connect the signal: Locate the correct connection terminals as shown on the previous page then connect your input signal on pos. 1 and 2 and the output signals on 3 and 4 as shown below.
HANBAY Inc User Manual RDx-B-xxxDT-10.31 Battery Fail Safe DiP 3 Reserved for custom functions DiP 4 DiP 5 DiP 6 DiP 7 DiP 8 With DIP switch 8 in the ON position, the actuator will move to 4 positions. When switch 8 is off, the actuator is limited to three positions.
Page 5
HANBAY Inc User Manual RDx-B-xxxDT-10.31 Battery Fail Safe 4-pos Functionality (Dip 8 ON) Input#1 Input#2 Action taken (Pin 1) (Pin 2) Back High High Moves to or remains in center position High Moves to or remains in right position High...
A sticking valve may be the problem. Remove the valve from the actuator, and re-test the actuator. Remove power. Re-check the wiring and the power/signal apparatus. Power actuator, and re-calibrate. If the problem persists, please call Hanbay for technical support. Battery Fail Safe Function: In the event of a loss of power or signal, the battery will maintain power to the P1 processor and trigger the actuator to move the valve to it’s designated fail-safe position, using power from the battery.
HANBAY Inc User Manual RDx-B-xxxDT-10.31 Battery Fail Safe Part Number Breakdown Serial Number: Full Hanbay Part Number: Page 8 of 8 www.hanbayinc.com Rev. 1 2019 1 800 315 4461 hanbaysales@hanbayinc.com...