Woodfold 240 Series Quick Start Manual

1 P
reParation
Preliminary Examination
Confirm the match of the packaged door to the intended
opening. The example label to the right shows the location
of the critical information.
Inspect the packaging. If the pack-
age was damaged when it arrived,
contact the shipping carrier first,
then notify Woodfold.
Lay out the contents on a flat surface near the opening
where the door is to be installed.
The package(s) contents should include
Door
;
; Track Section(s)
; Interlocking Jamb Molding (Aluminum extrusion a little less than the height of the door. See the top of Page 5 for description.)
; Hardware packet (Screws etc.)
; These instructions (Yes, yes, we know you had to find them if you're reading them, but we like to be complete.)
; A copy of the shipping label with all the information you need if you have to call Woodfold for any reason. Hold on to it for
future reference.
Woodfold Mfg., Inc
P.O. Box 346
Forest Grove, OR 97116
D
oor
Read and understand these instructions before proceeding!
Beginning installation before checking things out is discouraged!
Measure Twice - Cut Once so to speak
Caution! The factory greased the track for smooth operation! Hands and tools can spread
the grease all over, so please be careful.
D I
oor nstallatIon
S : 240, 440, 540, 640
erieS
B I
ulletIn nstall
It saves frustration!
Example Label
Your label will look similar but have your unique information
Opening
Width
Latch Style
Door Series
Number and Length
of Track Pieces
anD
-s -120906
tanDarD
Right/Left
Hand Stack
Order Number
Voice [503] 357-7181
Fax: [503] 357-7185
www.woodfold.com
740
Opening
Height
Single/Double End