Linksys WRT3200ACM Hardware Information page 4

the Automatic checkbox. This will automatically upgrade the Linksys WRT3200ACM if there is a
new firmware available. You may also click the Check for Updates button to check if there is a new
firmware available.
NOTE: If you wish to upgrade the Linksys WRT3200ACM manually, you can click the Choose
File button. However, you first need to download the appropriate firmware from the Linksys
WRT3200ACM Downloads page.
WIRELESS CONNECTION & SECURITY
1. What wireless security modes does the Linksys WRT3200ACM support?
The Linksys WRT3200ACM supports only WPA2 Personal and WPA2 Enterprise.
2. Which wireless connection standards and frequencies are supported by the Linksys
WRT3200ACM?
The Linksys WRT3200ACM is compatible with 802.11ac, 802.11g, 802.11n and 802.11a. It
supports the 2.4 GHz and 5 GHz frequencies.
3. What Channel Widths does the Linksys WRT3200ACM support?
It supports 20 MHz / 40 MHz / 80 MHz and 160 MHz.
4. What Channel Width should I set on the Linksys WRT3200ACM?
It is recommended to keep the Channel Width to Auto for both bands. The Linksys WRT3200ACM
will automatically select the channel with the least amount of interference if you leave the settings to
Auto.
5. How do I connect a wireless device to the wireless network of the Linksys WRT3200ACM?
To connect your wireless device to the network, follow the steps below:
Step 1:
Go to your device settings or adapter settings if you are using a laptop, and enable Wi-Fi.
Step 2:
Scan through the list of available wireless networks, and select the wireless network name (SSID) of
your router.
Step 3:
Enter your wireless network password, and select Connect or Join.
6. Where can I see the default wireless network name (SSID) and passphrase of the Linksys
WRT3200ACM?
The default SSID and passphrase can be located at the bottom of the Linksys WRT3200ACM.
7. Can I change the default wireless settings during setup?
Yes, you will have the option to customize the SSID and the passphrase.