Remote Panic Operation - Audiovox Prestige APS-15R Owner's Manual

the valet switch can be used as a system override switch. Open the car door (the alarm
WILL sound). Turn the ignition key on, and move the valet switch to the "on" position.
The alarm will stop sounding, and the vehicle can now be started.
NOTE: Always remember to move the Valet Switch back to the "off" position. This
will ensure that the vehicle remains protected at all times.
REMOTE PANIC OPERATION (CHANNEL 1):
The arming button on your key chain transmitter also functions as a "panic" switch for
instant activation of the alarm in emergency situations. To use the remote panic switch;
1. Press and hold the button on the key chain transmitter for 3 seconds or more. The alarm
will immediately sound.
2. To stop the alarm, press and release the button on the key chain transmitter. If the
button is not pressed, the alarm will automatically stop after 60 seconds.
WARNING: Excessive pressure on the transmitter buttons will damage the internal
components on the circuit board. All that is required is a light push to the button.
Page 4