General; Disclaimer; Introduction; Notes - Munters WDP Installation Manual

Gutter system
Table of Contents

Advertisement

Available languages

Available languages

1. General

1.1 Disclaimer

Munters reserves the right to make alternations to specifications, quantities, dimensions etc. for production or
other reasons, subsequent to publication.
The information contained herein has been prepared by qualified experts within Munters.
While we believe the information is accurate and complete, we make no warranty or representation for any
particular purposes. The information is offered in good faith and with the understanding that any use of the
units or accessories in breach of the directions and warnings in this document is at the sole discretion and risk
of the user.
Any complaints concerning the products are conditioned by the strict compliance of the instructions contained
by the manual. The manufacturer reserves the right to forfeit any claims e.g. corrosion resulting from non-
observance of the instructions and non-compliant use e.g. proper bleed-off.

1.2 Introduction

Congratulations on your excellent choice of purchasing a Munters WDP gutter system!
In order to realise the full benefit from this product it is important that it is installed, commissioned and
operated correctly. Before installation or using the WDP gutter system, this manual should be studied carefully.
It is also recommended that it is kept safely for future reference.
The manual is intended as a reference for installation, commissioning and day-to-day operation of the Munters
WDP gutter system.

1.3 Notes

Date of release: April 2014.
Munters cannot guarantee to inform users about changes or to distribute new manuals to them.
All rights reserved. No part of this manual may be reproduced in any manner whatsoever without the expressed
written permission of Munters.
The contents of this manual are subject to change without notice.
WARNING!
4
• All the components and spare parts MUST be stored in dry and clean
environment
• Max environment temperature during assembling and/or storage shall not
exceed 50°C.
• DO NOT stock packages under direct sunrays.
© Munters AB, 2018

Advertisement

Chapters

Table of Contents
loading

Table of Contents