Replacement Of A Celdek ® Pad - Munters WDP Installation Manual

5.4 Replacement of a CELdek
22
®
pad
Change pads only when the system is completely
dried.
Cut out the pad that needs to be replaced and
remove it.
Cut the new pad in the middle to obtain two pieces.
Insert the new distributor (it'll remain inside the top
gutter).
Insert the upper part of the CELdek ® that has been
cut. Ensure that the pad is at an angle.
Insert the second half at an angle as indicated on
the left.
Push two pieces in together until they are flush with
the other pads.
© Munters AB, 2018