Haverland TE700I How To Program
Hide thumbs
Also See for TE700I:
- Installation and operating instructions manual (9 pages) ,
- Instruction & installation manual (72 pages)
Advertisement
Table of Contents
HOW TO PROGRAM MY TE700I
Step 1: Using the right hand arrow to select the top icons, you must select first the sun icon. It
should have a box outline around it, this means that it is selected, and this is the ideal
temperature for your comfort. (ex. 23 degrees) Press the up and down arrows, change the
temperature to your liking. Press OK.
Step 2: With the right hand arrow select the moon crescent so there is a box on the moon and
press ok. Select your ideal economy temperature with the up and down arrows and then press
ok. (Ex. 17‐18 degrees.)
Step 3: Scroll with the right hand arrow to the Clock and press ok. Put the current time, press
ok and change the number with the up and down arrows. First the minutes will flash, change
the minutes, press ok and proceed to the hour and then press ok. The numbers above from 1‐7
are the days of the week, day 1 is Monday. It goes from Monday to Sunday, 7 being Sunday.
Choose the day of the week with the right hand arrow and press ok.
Step 4: Press the right hand arrow to select the last icon, the P. Press ok.
Step 5: Once you press ok, the numbers on the right hand corner should be flashing, select
with the + and – buttons the program "U1", or choose between the pre‐set programs (P1/P2).
Use the right hand arrow to select the day of the week to begin the programming and press
ok. Day 1 being Monday.
Step 6: The programming time starts off from 00.00. Use the right hand arrow to scroll as you
have to program each hour. Each line – is an hour as you can see the number at the bottom
and on the right hand side.
There is one line that is higher, this is the comfort temperature. The hours you want to
program with your comfort temperature, you must press the + button, it marks the higher
dash line. Once you press + or – button it will automatically switch to the next hour, if you wish
to go back to the previous hour, press the left hand arrow. Once you finish the whole day it will
automatically mark day 2 and you will have to choose with the right hand arrow each hour and
comfort or economy mode. Once all the days of the week are completed. Press ok and use the
right hand button to go to Auto. Press ok and the programming is finished. Leave the outline
box on the Auto, so your programming can come on.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Haverland TE700I
Summary of Contents for Haverland TE700I
- Page 1 HOW TO PROGRAM MY TE700I Step 1: Using the right hand arrow to select the top icons, you must select first the sun icon. It should have a box outline around it, this means that it is selected, and this is the ideal temperature for your comfort. (ex. 23 degrees) Press the up and down arrows, change the temperature to your liking. Press OK. Step 2: With the right hand arrow select the moon crescent so there is a box on the moon and press ok. Select your ideal economy temperature with the up and down arrows and then press ok. (Ex. 17‐18 degrees.) Step 3: Scroll with the right hand arrow to the Clock and press ok. Put the current time, press ok and change the number with the up and down arrows. First the minutes will flash, change the minutes, press ok and proceed to the hour and then press ok. The numbers above from 1‐7 are the days of the week, day 1 is Monday. It goes from Monday to Sunday, 7 being Sunday. Choose the day of the week with the right hand arrow and press ok. Step 4: Press the right hand arrow to select the last icon, the P. Press ok. Step 5: Once you press ok, the numbers on the right hand corner should be flashing, select with the + and – buttons the program “U1”, or choose between the pre‐set programs (P1/P2). Use the right hand arrow to select the day of the week to begin the programming and press ok. Day 1 being Monday. Step 6: The programming time starts off from 00.00. Use the right hand arrow to scroll as you have to program each hour. Each line – is an hour as you can see the number at the bottom and on the right hand side. There is one line that is higher, this is the comfort temperature. The hours you want to program with your comfort temperature, you must press the + button, it marks the higher dash line. Once you press + or – button it will automatically switch to the next hour, if you wish to go back to the previous hour, press the left hand arrow. Once you finish the whole day it will automatically mark day 2 and you will have to choose with the right hand arrow each hour and comfort or economy mode. Once all the days of the week are completed. Press ok and use the right hand button to go to Auto. Press ok and the programming is finished. Leave the outline box on the Auto, so your programming can come on. ...
- Page 2 USING THE MANUAL MODE There are two ways to use manually your TE00I, 1. Press the right/left arrows until you get to the Sun icon. Pres +/‐ in order to select the desired temperature. If the comfort temperature is higher that the room temperature, you will see a flame drawing on the left, this means the radiator is heating. The drawing will disappear once it has reached the desired temperature. Remember that this temperature is used as the comfort temperature for programming, so whenever you have your thermostat in programming mode, it will reach this temperature. 2. If you are in Auto mode, you can press the +/‐ buttons to select your desired temperature, you will see a hand drawing on the top of the temperature, and on the left the flame drawing (if the radiator is heating). The device will remain in manual mode as long as you see the hand drawing. If at any time you switch to another mode using the right and left arrows, the thermostat will stop being in manual mode, and whenever you return to Auto, it will be on programming mode. ...
Need help?
Do you have a question about the TE700I and is the answer not in the manual?
Questions and answers