demi L23HP Manual

DEM Part Number L23HP SN__________
1296 MHz Transverter Set For_____________________
Power Out Maximum:
Noise Figure and Gain:
DC Power Requirement:
IF Option:
Max IF Drive Level
10 MHz Source Level
Antenna Option:
Transmit Enable: Pin 5
Other Options:
Pin 9
Sequencer
Sequencer Outputs
Pin 1 (Sequencer step 1)
Pin 2 (Sequencer step 2)
Pin 3 (Sequencer step 3)
Pin 6 Ground
Pin 7 Ground
Pin 8 Ground
Other notes:
Operational Overview:
newest version of Down East Microwave's
23 cm Transverter. It is a complete new
design in a smaller package utilizing the
latest in MMIC amplifier and SAW filter
technology coupled with a standard low
phase noise synthesizer for frequency
accuracy and stability. This technology
allows a "No-Tune" performance and
function enabling the user to select a
different IF frequency range (10, 6, or 2
Meters) if desired. This design also
includes other improvements over past
versions by offering a 4 step sequencer, a
/Built/L23HP.doc
25 W linear
1.5 dB maximum @ 17 dB conversion gain
11.5 - 15.5 VDC @
Common
< 0dBm
+3dBm +/- 6dB (Always terminate the port when not in use)
Common
Ground
Pin 4
Enabled
This is the
1
10 Amp
Split
+10dBm 100 mW
Separate TX & RX
Positive Voltage
Disabled
Transmit
Open
High (750ma)
Low (100ma)
Ground
Ground
Ground
1W 10W
Receive
High (750ma)
Open
Open
Ground
Ground
Ground
12/27/2017