Table of Contents
Advertisement
2.4
USER SETTINGS
Press the
button to enter the navigation menu.
Press buttons
USER".
N a v i g a t i o n
01.
SET-POINT
02.
USER SETTING
03.
TIME PROGRAMS
Fig. 2-6
Press the
button to enter the menu.
- Party mode. Activating the party mode sets all zones
in "Comfort" mode until the next programmed status
change. The central heating or cooling mode will de-
pend on the system state.
U s e r
s e t t i n g
Party mode: No
Fig. 2-7
U s e r
s e t t i n g
Gas prices
Gas type:
Methane:
LPG:
Fig. 2-8
- Gas prices. It lets you enter gas prices, also selecting
GAS type (methane/LPG). These data allow the sys-
tem manager to calculate the working point with the
maximum efficiency between heat pump operation and
GAS boiler.
until selecting menu "02. SET.
m e n u
D 0 1
D 0 2
Methane
000.00 c€/m
3
000.00 c€/m
3
U s e r
s e t t i n g
Electric energy prices
Elet.F1:
Elet.F2:
Elet.F3:
Fig. 2-9
- Electricity prices. It lets you enter electricity prices.
U s e r
s e t t i n g
Energy band time
Tariff:
F1:
00:00 - 00:00
F2:
00:00 - 00:00
Fig. 2-10
- Time slots. Allows selecting between Dual-rate and
Multi-rate tariff, enter the time slots related to the
electricity prices.
- Dual. You can set the two daily time slots, the F1 and
F2 tariffs are valid from Monday to Friday while the
F2 tariff is applied to Saturday and Sunday.
- Multi-rate. You can set the three daily time slots, the
F1, F2 and F3 tariffs are valid from Monday to Friday
while the F2 tariff is applied to Saturday and Sunday.
- Heat pump manual disabling. The option lets you
permanently disable heat pumps as the main generator.
Heat pump temporary enabling. The option lets you
enable heat pumps according to the time slots.
U s e r
s e t t i n g
Heat pump manual
disable comand:
Heat pump tempor.
enable comand:
Fig. 2-11
Press button
for the option "Disable heat pumps"
to start blinking.
14
D 0 3
000.00 c€/kWh
000.00 c€/kWh
000.00 c€/kWh
D 0 4
Two part
D 0 5
No
No
Advertisement
Table of Contents
