Siemens A65 Puma Service Manual page 36

SIEMENS
A65 Level 2 Service Manual
Printing IMEI label
The module "Print IMEI label" offers the possibility to re-print IMEI labels for mobiles
again.
You are able to print 1 label in just one step.
To prevent that misaligned labels are being printed, the setting "test printer = Yes" is
activated as default. After having printed a well-aligned test label you can switch setting
to "No" and print the correct label.
Hint:
For correct printing of IMEI labels you must have a Zebra – label printer with special material
that fits for label printing. This printer has to be connected to local LPT1 printer port (also see
Installation of IMPRINT) and MUST feature a printing resolution of 300dpi.
SSMC MD CCQ
Copyright © Siemens Mobile
36 of 44
All rights reserved
Internal Service Use Only
Siemenes Shanghai Technical Support Center