Siemens A65 Puma Service Manual page 25

SIEMENS
A65 Level 2 Service Manual
Step 6:
Take a new microphone and mount it in its place of the
bottom-case.
Step 8:
Put the PCB Assembly into the Uppercase and align the Bottom-case to the Uppercase. Check that the Bottom-
Step 9:
Place the four screws in the holes tightly then install screw cover.
Copyright © Siemens Mobile
All rights reserved
Siemenes Shanghai Technical Support Center
case assembly is ok and all the components are in their places.
25 of 44
Step 7:
Take vibrator and mount it in its place of the
bottom-case.
SSMC MD CCQ
Internal Service Use Only