Why is there no sound when the
•
You may have a weak battery. Recharge your player
•
Check if your headphone plug has been inserted into the headphone jack of the unit completely
•
When you press the
•
Check if the volume is at an audible level. Increase the volume using the VOLUME + button.
•
If your GoGear is in pause mode, press the
•
Do a soft reset by using a pencil or similar small object to press the RESET pinhole and then press and hold the
button to switch on the device.
•
If nothing works then try connecting your GoGear player to the computer and then use the Firmware Manager to
recover your GoGear to the factory setting.
(Back to Top)
button is pressed on my GoGear?
button, make sure that it is pressed and held for long enough until the display light up.
button to resume playback.