Bolt Torque Chart - Bison MMRB-20 Operator's Manual

TORQUE CREW SPECIFICATIONS
NON-METRIC BOLTS TIGHTENING SETTINGS (IN.)
l
GENERAL INFORMATION
Screw's Torque Values
All the bolts use don this machine are Grade "5", unless a higher grade is
specified. Always replace bolts with others of the same grade. Metric screws
have the class number marked on the head.
Tighten the screws according to the above table, unless the Operator's Manual
indicates something different. Do not over tighten the screws, since this may
cause failure during operation.
NOTE: DO NOT use these values if a different torque value, for an exact
application, is specified. The given values are for general usage. Check
periodically the tightening of the screws.
57