Usb2.0 to four/two high speed serial ports (9 pages)
Summary of Contents for MosChip MCS7830
Page 1
MCS7830 User Manual for Windows 7/ Vista MCS7830 USB2.0 to High Speed Ethernet Adapter User Manual For Windows7 / Vista 32-bit and 64-bit Contents: Page Driver installation for Windows7/ Vista 32-bit: ............1 MCS7830 Device Installation & Detection:............. 3 Uninstalling MCS7830 Device & Drivers:............... 3 Driver Installation in Windows7/ Vista 64-bit:............
Page 2
MCS7830 User Manual for Windows 7/ Vista You will get a ―User Account Control‖ window saying “An unidentified program wants access to your computer”. Click on Allow to continue installing the Driver. You will get an installation window and press ―Install‖ button to install the drivers for High-Speed USB Ethernet adapter During the installation process, a ―Windows Security‖...
Page 3
MCS7830 User Manual for Windows 7/ Vista 2. MCS7830 Device Installation & Detection: Connect MCS7830 to the USB Host controller of the PC using a USB cable. The first time you plug-in the cable into the USB port, Windows will start installing the device driver software.
Page 4
This will remove the MCS7830 device driver from your PC Method 3: The MCS7830 device driver can also be uninstalled through ―Device Manager‖ as well. Go to Device Manager, Select MosChip High-Speed USB MultiSerial Compound Device from the ―Network adapters‖, Right Click on it, Select ―Uninstall‖...
Page 5
Administrator group on the system. 4.2 Installing the Driver in Windows7/ Vista 64-bit: Before running the installer (Setup.exe) or uninstaller (Uninst.exe) utility of MCS7830, right click on them and select ―Run as administrator‖. The same is shown in the following figure.
Page 6
MCS7830 User Manual for Windows 7/ Vista Note: Running the setup utilities as administrator is required, as “User Account Control (UAC) is enabled by default in Windows7/ Vista, which does not allow the user to make changes to OS components. If UAC is disabled, you can install the driver without running the setup utilities as an administrator.
Page 7
MCS7830 User Manual for Windows 7/ Vista After completion of install process, Connect MCS7830 to the USB Host controller of the PC using a USB cable. The device detects automatically MCS7830 device detection can be confirmed by checking at the Device manager. Check...
Page 8
MCS7830 User Manual for Windows 7/ Vista 5. Support: Queries, Technical questions if any can be sent to techsupport@moschip.com support@moschip.com.
Need help?
Do you have a question about the MCS7830 and is the answer not in the manual?
Questions and answers