Commercially marketable in the US as a medical device. AiroDoctor is not cleared or approved by the FDA, but is available per FDA policy during the COVID-19 public health emergency. Dear Customer, Thank you for purchasing AiroDoctor. In order to facilitate the installation and use of this unit,...
Scientific Data AiroDoctor air purifier with photocatalytic functionality completely breaks down harmful substances, such as viruses and pathogenic bacteria. This process is very efficient and safe for the environment as it produces no ozone or other chemical substances. The fine-pored structure of the photocatalytic system allows filtration of particles from PM2.5 classifications to less than 0.1μm.
(up to 0.3 μm). Environmentally friendly UVA LED photocatalysis technology with 250g of UVA LED Photocatalytic Filter solid titanium dioxide eliminates harmful gases and substances as well as the smallest viruses and bacteria. • Carbon and HEPA filters are integrated filters. https://airodoctor.com/us/definitions-and-references...
Do not place near TVs or radios. This may distort images or produce noise. Using AiroDoctor Remote may cause interference with your TV or radio. Place at a distance of 3 ft or more from 3 ft these devices.
This may cause electrical shock or injury. Do not use this product near gas appliances, heating appliances, or stoves. Please keep AiroDoctor and AiroDoctor Remote out of reach of children to avoid unintended damage or injury.
Installing the product Installing the Filter 4. There are differences between the inside and the outside of the absorption filter (Carbon Filter and HEPA Filter). 1. Remove the Front Cover (Use both hands to pull). 5. There are differences between the inside and the 2.
Page 8
Installing the Product Functional Description Icon Name Description When the product is plugged in and on standby, the “POWER” button turns on the product. Pressing “POWER” again sets the unit to standby. (The icon is red when in Power standby and green when powered on) ON/OFF If you press the power button on the operation panel while the product is running, the product will enter standby mode.
Page 9
Installing the unit Functional Description Icon Name Description When the product is on, press the “CHILD LOCK” button to lock all buttons. In this CHILD LOCK mode, buttons will have no reaction to any touch. To turn off this mode, press “CHILD LOCK”...
Cleaning & Maintenance Unplug power cord before cleaning & maintenance of the product. Exterior Body of Unit • Use a soft cloth to remove stains and dirt from the unit body. • For tougher stains, dampen cloth with water and/or use mild detergent and wipe off. Pre-Filter (approximately twice per month) •...
Filter Replacement You may need to replace filters sooner than recommended depending on where and how you use the appliance (such as an environment or areas with higher air pollution). Additional filters must be purchased separately. Recommended filter cleaning/replacement period Item Cleaning period Replacement period...
Troubleshooting Check the following troubleshooting instructions and contact the vendor where you purchased the unit if the issue is not resolved. Malfunction Inspect / How to fix 1. Make sure the power plug is fully inserted into the outlet, then retry powering on. 2.
Specifications Product Name AiroDoctor Air Purifier Model Name WAD-M20 Max. Room Size Up to 2150 ft CADR )Clean Air Delivery Rate( 282 ft Noise Level (Max.) 55 dB Pre-Filter, Integrated )Carbon+HEPA( Filter, UVA Filter Type LED Photocatalytic Filter with 250g of solid titanium...
Page 14
For cleaner and healthier air AiroDoctor is distributed in the USA and Canada by: AEX TECHNOLOGY SOLUTIONS, LLC. 444 West Lake Street Suite 1700 Chicago, IL 60606 www.airodoctor.com/us...
Need help?
Do you have a question about the WAD-M20 and is the answer not in the manual?
Questions and answers