Wi-Fi Specific Settings - Audiovox PC5740 User Manual

4.3 WI-FI Specific Settings

The following options are available if you selected "detect Wi-Fi" device during
setup. If you have added a Wi-Fi device after having installed VZAccess Manager,
you can select "Options", "Run Wizard" to run the setup wizard again.
If you connect your Wi-Fi device after VZAccess Manager has been started and you
are in coverage of a Wi-Fi network, selecting "Options", "Refresh Networks" will
cause VZAccess Manager to recognize your Wi-Fi device (and WWAN if
connected) and scan for available networks.
Wi-Fi Preferences
The options relevant to Wi-Fi are found on the "Options" tab and the "Wi-Fi" tab
under preferences. Select "Options" then "Preferences".
The first relevant tab is the Wi-Fi tab.
Wireless adapters: In the rare case you have more than one Wi-Fi adapter, you can select the
Wi-Fi adapter you are using. If your adapter does not appear, try upgrading to the latest
available drivers from the Wi-Fi device manufacturer.
Automatically connect to preferred networks: If desired, you can select to have VZAccess
Manager automatically connect to your preferred Wi-Fi networks when they are detected.
Automatically switch from WWAN to Wi-Fi: Requires that "Automatically connect to
preferred networks is selected. When you select this option to automatically switch from
WWAN to Wi-Fi VZAccess Manager will disconnect your WWAN connection (NationalAccess -
BroadbandAccess, NationalAccess, or Quick 2 Net (14.4 kbps)) and automatically connect via
Wi-Fi when a preferred Wi-Fi network is detected. WWAN connections are only relevant if
using a 1XRTT/CDMA wireless phone and cable or an 1XEVDO/1XRTT/CDMA PC Card.
Preferred Networks: When you connect to or add Wi-Fi networks they will appear in this list.
If using the "Automatically connect" feature VZAccess Manager will try to connect to the
networks in the order they appear in this list.
PC5740 User's Manual
29