Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ADE Rotomat Series
Summary of Contents for ADE Rotomat Series
- Page 1 IMPORTANT READ CAREFULLY BEFORE USE PLEASE KEEP FOR FUTURE REFERENCE...
-
Page 2: Table Of Contents
Table of Contents Introduction Opening the packaging Installation Electrical connection Operational control General precautions Mechanical and electrical fuses Inspection test Operating features Grinding the blades Cleaning Maintenance Disposal... -
Page 3: Introduction
1.2 Use The Rotomat series kitchen cutters are designed for shredding, cutting and crumbling into small pieces, as well as for beating and kneading of foods such as meat, fish, vegetables, cheese, nuts, etc. Foods to be processed should already be pre-portioned into pieces so that they fit easily through the feed opening on the lid. -
Page 4: Opening The Packaging
In the event of damage to safety devices, defects, malfunctions, suspected breakage, incorrect operation, unusual noises, etc., the machine must be taken out of operation immediately and ADE must be notified of renewal or replacement. START-UP Upon receipt of the kitchen cutter package, make sure that it is free of any damage that occurred during transport. -
Page 5: Electrical Connection
2.3 Electrical connection Before carrying out the connection, be sure to check whether the power grid ratings comply with the ratings indicated on the machine nameplate. Insert the plug into the socket and check whether the existing mains supply is equipped with a suitable circuit breaker. -
Page 6: Mechanical And Electrical Fuses
3.2 Mechanical and electrical fuses The following mechanical safety device is installed: Safety is provided by the lid, which can be removed only with a hinged locking arm. The following electrical safety devices are installed: A magnetic switch and a mechanical micro-switch, which turn off the machine when the lid is removed and turn it on again only when this safety device is in the closed position;... -
Page 7: Grinding The Blades
Before putting very large pieces into the pot, they should be shredded manually. Fill liquid products only up to the maximum mark in the pot. Take a body posture that makes work easy and excludes accidents. The body must be perpendicular to the work surface. -
Page 8: Cleaning
4.1 Cleaning Pull the plug from the mains socket to disconnect the machine from the mains. Pressing the stop button on the machine should by no means be regarded as sufficient for this purpose. Set the speed controller to the “0” position. Open the lid by sliding the locking arm aside until the lid can be removed. -
Page 9: Disposal
EC standards in mechanical engineering. WARRANTY ADE will repair or replace this product if it fails within 1 year of the date of sale (proof of purchase is required) due to lack of workmanship or defective material. - Page 10 − RoHS Directive 2011/65/EC in the currently valid versions. The declaration will be void if a change that was not agreed with us has been made on the machine. Hamburg, Octobre 2018 ADE GmbH & Co. Hammer Steindamm 27-29 D-22089 Hamburg...
- Page 11 430 x 340 x 290 mm 440 x 340 x 400 mm 720 x 350 x 500 mm Blades Two rotating sickle blades attached to a spindle. BLOCK DIAGRAM Rotomat series kitchen cutter MOTOR POLARITY ON/OFF SWITCH CABLE RELAY BLACK...
- Page 12 Distributor:...
Need help?
Do you have a question about the Rotomat Series and is the answer not in the manual?
Questions and answers