Contents Safety Precautions Warning Attention Product Description Main Machine Accessories Product Installation Installation Storage (With/Without Nails) Product Usage Power On/Off and Suction Power Switch Power Adapter Usage Status Indicator LEDs Adapter Basic Parameters Rolling Brush Usage Accessories Usage Quick Setting About Works With Mijia Product Cleaning Removal and Installation of the Dust Cup...
Safety Precautions Read the manual before use Warning: in order to avoid causing harm to you and others and causing unnecessary property damage, read carefully and observe the following "safety precautions" before use. The safety precautions are divided into two parts: "Warning" and "Attention".Both "Warning" and "Attention" are important parts of safe use. Be sure to follow them.
Warning 21. Keep the vacuum cleaner away from the hospital's electromagnetic equipment; 22. For indoor use only, do not expose to rain; 23. If the cord is damaged, it must be replaced by the manufacturer, our service agent or other qualified persons, in order to avoid a hazard;...
Product Description Main Machine Shift Switch Charge Jack Power Switch Dust Cup Power Indicator LED Anti-off Buckle Status Indicator LED Dust Cup Dust Cup Release Button Release Button Metal Connecting Rod Release Key Roller Light Sensor Release Button Rolling Brush Release Button Floodlight Rolling Brush...
Accessories Long Flat Suction Multi-function Brush (Assembly with Long Flat Suction) Mattres Brush Sofa Brush Extension Hose Carbon Fiber Rolling Brush Power Adapter Cleaning Brush Magnetic Wall Mount Expansion Hose×2 Screw ×2 Installation Main Machine Installation 1. Insert the electric brush into the socket of the metal connecting 2.
Storage Installation without Nails: Fix the magnetic wall mount with washable glue. Recommended for use on glass and ceramic walls;keep the wall clean before installing, no dirt, impurities, etc. 1. Paste transparent sticker to the wall, 88cm above the ground, as in figure 1; 2.
Power Adapter Usage 1. Fix the charging cable 2. Charge Before charging, make sure that the adapter is connected to the rated Attach the vacuum cleaner to the magnetic wall mount, pull out the ac power supply. The charging cable is stuck into any power line slot rubber plug of the power interface, and insert the adapter connector, on both sides of the magnetic wall mount to help fix the charging At this point, the charging indicator light increases successively according...
Usage of Rolling Brush 2. Soft velvet rolling brush can be used for floor tile, wooden floor, 1. Carbon fiber rolling brush can be used for floor tile, floor and short etc. and polished. It is recommended not to use soft velvet rolling wool carpet.
Quick Settings 1. Users can control the performance of the product through “ROIDMI” APP which can be downloaded in APP store. This APP supports both Android and IOS. Every Roidmi product can be connected through it and is synergistic with all other ROIDMI products. You can also visit www.roidmi.com/en to download the APP.
Dust Cup Cleaning 1. Cyclone mechanism cleaning: Take out the cyclone mechanism in 2. Dust cup and metal mesh cleaning: wash the dust cup and metal the dust cup, clean the dust and hair attached to the metal net. mesh with clean water and use it after drying to prevent the dust from clumping when used again.
Executive Standard: Draft EN 301 489-1:V2.2.0:2017 Draft EN 301 489-17:V3.2.0:2017 EN 300 328 V2.1.1:2016 EN60335-1:2012/A13:2017 EN 60335-2-2:2010/A1:2013 EN 62233:2008 EN 62479:2010 EN 55014-1:2017 EN 55014-2:2015 EN 61000-3-2:2014 EN 61000-3-3:2013 Service Email: wxrm@roidmi.com For product sales information, please check the website:www.roidmi.com/en Made in China...
ROIDMI Cordless Vacuum Cleaner Maintenance Record First maintenance record Second maintenance record Name of maintenance agent Name of maintenance agent Maintenance time Maintenance time Fault condition Fault condition Fault cause Fault cause Fault handling situation Fault handling situation Certificate of return or exchange...
Need help?
Do you have a question about the XCQ03RM and is the answer not in the manual?
Questions and answers