Breville AirRounder Connect Instruction Book page 14

Night Mode
Your purifier fan heater is fitted with a light-
sensitive sensor that will intelligently stop the
LED display screen from illuminating at night
when in a dark place.
The Night mode will automatically turn off all
lights on the LED display panel and operate in
the last setting.
Press any button on the control panel
or remote control to re-engage the LED
display panel.
TIMER
AUTO-OFF TIMER
The purifier fan heater comes with a
7-hour auto-off timer to turn off after a set
number of hours.
The purifier fan heater can be set in 1 hour
increments up to 7 hours. After the selected
number of hours have elapsed, the purifier fan
heater will switch to standby mode. If no timer
is set, the purifier fan heater will continuously
operate until it is manually switched off.
AUTO-OFF TIMER Example: Set the auto-off
timer to 3 hours, and the purifier fan heater
will stop operating after 3 hours. 1h and 2h will
illuminate on the LED display screen.
The auto-off timer can be set in any MODE.
To set the timer, press the
on the control panel or the remote control until
the desired number of hours displays on the
LED display screen. The time will display on
the LED display screen. The timer will start on
the selected mode, and will stop automatically
once the timer has expired.
The LED display screen will display the
remaining auto-off time.
14
button repeatedly
REMAINING TIME Example: Set the
auto-off timer to 3 hours, once 1 hour has
elapsed, the remaining time will be displayed
in a decremental way, whereby 2h will only
illuminate on the LED display screen, after
another hour has elapsed 1h will illuminate on
the LED display and so on and so forth until
the set time has completely elapsed.
To cancel the pre-set auto-off time, once the
timer is set, press the
the control panel or the remote control until
the number of hours no longer illuminates on
the LED display.
NOTE
The timer can be set on all modes and all
modes can be adjusted at any time once the
timer is set.
The purifier fan heater will switch to standby
mode once the set time has elapsed.
OSCILLATION
The purifier fan heater has horizontal
oscillation. The oscillation can be set
on all modes.
To activate oscillation, press the
repeatedly on the control panel or the remote
control to select between 60, 120 and 180
degrees, until the desired degree of oscillation
displays on the LED display screen. The
purifier fan heater will move left to right
continuously.
To stop and direct the orientation of your
purifier fan heater during oscillation, when the
airflow has reached your preferred position,
press the button repeatedly on the control
panel or the remote control until 60, 120 or 180
degrees is no longer illuminating on the LED
display screen.
When the purifier fan heater is turned off,
the unit will stop oscillating and return to
centre position.
When turned on from standby, the purifier fan
heater will start oscillating at the same angle as
previously set. If no oscillation angle was set,
the unit will stay at the same position as it was
when it stopped.
button repeatedly on
button