Dixon Bayco 5200-SFI Maintenance & Operating Instructions

Sight glass kit

Advertisement

Maintenance & Operating
5200-SFI and 5200-SFI-3 Sight
USA:
Dixon Bayco USA
Chestertown, Maryland
Phone: 410-778-2000
Fax: 410-778-4702
Toll Free: 800-355-1991
E-mail: dixonbayco@dixonvalve.com
Europe:
Dixon Group Europe Ltd
Preston, England
Phone: +44 (0)1772 323529
Fax: +44 (0)1772 314664
E-mail: enquiries@dixoneurope.co.uk
Mexico:
Dixva, S. de R.L. de C.V.
Monterrey, N.L
Phone: 01-800-00-DIXON (34966)
Fax: 01-81-8354-8197
E-mail: contactenos@dixonvalve.com.mx
Instructions
Dixon Bayco
Glass Kit
For Sales and Service Contact
dixonvalve.com
For
Canada:
Dixon Group Canada Limited
Innisfil (Barrie), Ontario
Phone: 705-436-1125
Fax: 705-436-6251
Toll Free: 877-963-4966
E-mail: isales@dixongroupcanada.com
Asia Pacific:
Dixon (Asia Pacific) Pty Ltd Wingfield,
South Australia
Phone: +61 8 8202 6000
Fax: +61 8 8202 6099
E-mail: enquiries@dixonvalve.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5200-SFI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Dixon Bayco 5200-SFI

  • Page 1 Maintenance & Operating Instructions Dixon Bayco 5200-SFI and 5200-SFI-3 Sight Glass Kit For Sales and Service Contact USA: Canada: Dixon Bayco USA Dixon Group Canada Limited Chestertown, Maryland Innisfil (Barrie), Ontario Phone: 410-778-2000 Phone: 705-436-1125 Fax: 410-778-4702 Fax: 705-436-6251 Toll Free: 800-355-1991 Toll Free: 877-963-4966 E-mail: dixonbayco@dixonvalve.com...
  • Page 2 5200-SFI and 5200-SFI-3 Sight Glass Kit 5200-SFI / 5200-SFI-3 Sight Glass Replacement Disassembly SAFETY GLASSES MUST BE WORN DURING DISASSEMBLY AND SERVICE. 1. Remove the retaining ring from the assembly. 2. It is recommended to apply penetrating oil to ease removal of the sight glass.
  • Page 3 5200-SFI and 5200-SFI-3 Sight Glass Kit Assembly 1. Insert the new O-rings in to the grooves. 2. Apply O-ring lubricant on the outside face of the sight glass to reduce friction. Position the new sight glass as shown in figure 2, making sure that the edge with the chamfer will pass the O-rings first then press the sight glass evenly into the bore.

This manual is also suitable for:

5200-sfi-3

Table of Contents