Table of Contents
Advertisement
Image Size
8MP (3264*2448), 12MP (4032*3024), 24MP (5632*4224)
Night Mode
a) Min. Blur: Short exposure time to minimize motion blur for
b) Max. Range: Longer exposure time to extend IR flash range
c) Balanced: combination of above 2 options;
Multi-shot
Takes 1~5 photos per trigger, 2sec delay between each photo.
Video On
Video Size
FHL-1080P (1920*1080), HD-720P (1280*720), WVGA
(848x480)
Video length
05~59 Secs
PIR
Settings
PIR Switch
Sensitivity
Delay
Time Lapse
Barn Owl Tech, Inc
better image quality; shortened IR flash range;
for better night vision; lower image quality;
Programmable Options
OFF/
O N
Note:
a) with PIR switch off, the camera will not trigger on
motion detection
b) with PIR switch on, the camera will trigger on
motion even when Time Lapse is ON.
High, Middle, Low
Higher sensitivity is 1) more sensitive to
movements by smaller subjects; 2) longer
detection distance; 3) easier for sensor to detect
difference between body heat and outdoor
temperature. In a high
body heat of subjects and environment
temperature is harder to measure, so w
setting to
H igh
Select "ON", press "OK", to set a time interval
between motion triggers. This option can prevent
the camera from taking too many photos or
videos.
Example: C amera will wait 1 minute between
motion triggers if Delay is set to 00:01:00
Configurable delay time: 0 0:00:05~23:59:59.
Select "ON", press "OK", to set the interval where
the camera will trigger automatically upon the
temperatur
.
e environment,
e
s uggest
14
Advertisement
Table of Contents
