Croydex Carra WC450622 Manual

Thank you for purchasing this cabinet. Please follow the fixing and care instructions to ensure
your cabinet is fitted safely and retains its high quality finish. Please retain this leaflet for future
reference.
This instruction leaflet applies to the following products:
WC450622 - Carra Single Door White Steel Cabinet
WC450605 - Carra Single Door Stainless Steel Cabinet
WC450822 - Carra Double Door White Steel Cabinet
WC450805 - Carra Double Door Stainless Steel Cabinet

Fixing Pack Contents

(a) Mounting Screws
(b) Wall Plugs
(c) Plastic Washers
(d) Door Knob Screws
(e) Door Knobs
Fixing pack contents will vary depending on the individual design of the cabinet.

Tools Required

Drill; 6.5mm masonry drill bit (6.5mm ceramic drill bit optional); Cross-head screwdriver; Pencil;
Spirit level
KEEP DIY TOOLS OUT OF THE REACH OF CHILDREN

Home Safety Advice

It is recommended that two people fit the cabinet to ensure that it is fitted safely.
Always take care when using an electric drill, particularly in the bathroom. Always check for
hidden cables and pipe work before drilling and take extreme care if there is any water in the
working area.
It is advisable to use a residual current circuit breaker (RCCB).
Always wear suitable eye protection when drilling.
If the product is to be fitted on a ceramic tiled wall, a ceramic drill bit should be used. Always
ensure that the drill hole passes through the central tiled area rather than through the grouted
area. To prevent unnecessary damage to the tile, mask the area around the hole with tape
before drilling.
Do not strike the product with hard or sharp objects.
Do not overload the cabinet. Maximum safe working load is 10kg evenly distributed if mounted
on to a solid wall. If mounted on to a cavity wall reduce the load to 5kg evenly distributed.
Note: The wall plugs supplied are for use on solid walls only. For cavity walls or
plasterboard use specialist fixings that are available from all good DIY stores.
CAB 128 R02