DANGER! General safety instructions Compliance with the protection rating After tasks on the Flockmatic Vario, if the housing This operating manual contains basic instructions that must be or individual cable glands are not properly closed, complied with for installation, commissioning, operation, and so that a reliable seal is ensured, moisture can maintenance.
Activate the button for approximately 1 second to switch on the device; the The Flockmatic Vario is operated via the two-row display with 2 device is in operating status Off. x 16 characters and the membrane pushbuttons. The green LED flashes briefly at 3.1 Button functions...
3.3 Menu structure 3.4 Menu items Basic view: If an alarm should not be output via the Flockmatic Vario, In the basic view the momentary delivery capacity is displayed, but rather should be output via one of the devices cited, and in operating status Off, the current mode is displayed.
Installation and maintenance Electrical connection The Flockmatic Vario has been designed and built in 4.1 Safety instructions for installation accordance with the applicable guidelines. Prior to leaving the plant the product was carefully tested and it left the plant in and mintenance tasks faultless condition.
The hose of the dosing pump is replaced without dismounting the rotor. 4.6 Maintenance Some parts of the Flockmatic Vario are subject to wear due to chemical and mechanical stress. Thus regular inspection is required for safe, long-term operation. Regular preventive maintenance of the system protects against unscheduled interruptions of operation.
After the winter season, all components must be examined to Vario S determine that they are functional. All dismounted parts must be remounted at their intended position. Check the settings of the Flockmatic Vario. 100 509 PE dosing hose 6x4X1 4.8 Decommissioning...
Need help?
Do you have a question about the Flockmatic Vario and is the answer not in the manual?
Questions and answers