Page 1
INSTRUCTION MANUAL Survivor Filter Personal Water Filter L600 For other languages, please visit: www.survivorfilter.com/pages/manuals Copyright SURVIVOR FILTER™ 2017...
Page 2
Survivor Filter Personal Water Filter Save These Instructions The SURVIVOR FILTER Personal Water Filter is a precision device. Please follow all instructions in order to allow trouble free and reliable performance. ANY PROBLEMS? Do Not Return Product to the Store.
Page 3
Survivor Filter Personal Water Filter Component View Water Inlet Ultra Filter Mouthpiece Cotton Pre-Filter Carbon Filter Copyright SURVIVOR FILTER™ 2017...
Page 4
Survivor Filter Personal Water Filter 3 Filter Components Provide Triple Filtration Component #3 - The Carbon Filter Ultra Filter Component #2 - The Cotton Pre-Filter Component #1 - The Copyright SURVIVOR FILTER™ 2017...
Page 5
The is internally threaded to accept a 28 mm bottle thread (used by many soda pop bottles). Survivor Filter Collapsible It is also designed to attach to the Canteens as shown in the photo below. Copyright SURVIVOR FILTER™ 2017...
Page 6
Ultra Filter has become clogged with contaminants. Follow the instructions in this manual on how to easily remove and clean the Ultra Filter. Copyright SURVIVOR FILTER™ 2017...
Page 7
Survivor Filter Personal Water Filter The Carbon Filter Component #3: Carbon Filter Mouthpiece is integrated into the unit. Carbon Filter For maximum effectiveness, the should be replaced after 1,000 Liters (264 Gallons) of use. Copyright SURVIVOR FILTER™ 2017...
Page 8
2. Place Survivor Filter directly into the fresh water source. Survivor Filter 3. Blow gently into the to dislodge particles or air pockets. 4. Pull water up through the Survivor Filter Mouthpiece, just like a straw. Copyright SURVIVOR FILTER™ 2017...
Page 9
Canteen Water Inlet 2. Screw the filled into the of the Survivor Filter. Survivor Filter and Collapsible Canteen 3. Invert the shown in the photo below. 4. Squeeze the Canteen to start the flow into the Survivor Filter and drink.
Page 10
2. Screw the filled pop bottle into the Water Inlet of the Survivor Filter. Survivor Filter 3. Invert the and pop bottle as shown in the photo below. 4. Squeeze the pop bottle to start the flow into the Survivor Filter and drink. Copyright SURVIVOR FILTER™ 2017...
Can I clean the filters? How is this done? Yes. The Survivor Filter is designed to allow the user to easily remove, clean or replace the filters. Please see page 17 for more information. Copyright SURVIVOR FILTER™ 2017...
Page 12
If the water source is particularly dirty or contaminated, more frequent replacement of the Carbon Filter Ultra Filter and cleaning/replacement of the may be required in order to keep your Survivor Filter working properly. Copyright SURVIVOR FILTER™ 2017...
Page 13
Lock Pins (A) are aligned with the openings of the Lock Slots (B). 3. Pull Mouthpiece with integrated Carbon Filter Filter Body. away from Be careful not to break the Lock Slots (B). Copyright SURVIVOR FILTER™ 2017...
Page 14
Water Inlet Cotton Pre-Filter Removal of 1. Turn the Water Inlet Counter-Clockwise. 2. Remove Water Inlet from Filter Body. 3. Remove Cotton Pre-Filter from Water Inlet. Filter Body Water Inlet (Cotton Pre-Filter located inside Water Inlet) Copyright SURVIVOR FILTER™ 2017...
Page 15
Personal Water Filter Disassembly Ultra Filter Removal of 1. Follow the instructions in this manual to remove both Water Inlet Carbon Filter from filter body. Filter Body. 2. Place thumb on the base of Filter Body Copyright SURVIVOR FILTER™ 2017...
Page 16
Survivor Filter Personal Water Filter Disassembly Ultra Filter Removal of continued 3. Push from bottom of Filter Body to eject Ultra Filter. 4. Remove Ultra Filter. Ultra Filter ejected Copyright SURVIVOR FILTER™ 2017...
Page 17
DO NOT soak the Carbon Filter in vinegar as this will shorten the life of the Carbon Filter. Store your Survivor Filter in a clean, dry place. Avoid exposure to direct sunlight and store away from excessive heat sources. Copyright SURVIVOR FILTER™ 2017...
ABS, Food Grade Carbon Filter, Cotton Mesh, Membrane Ultra Filter (Polysulfone), Silicone Rubber O-Rings. Survivor Filter is manufactured for and distributed by SURVIVOR FILTER™. Replacement parts and filters may be purchased on Amazon.com and at www.survivorfilter.com. Copyright SURVIVOR FILTER™ 2017...
Need help?
Do you have a question about the L600 and is the answer not in the manual?
Questions and answers