Advertisement
Quick Links
Skan 25.0
Battery charger
JM no. 609 03 30
Battery charger
EN
Cargador de baterías
ES
Caricatore batteria
IT
Ładowarka do akumulatorów
PL
Batterioplader
DA
Nabíječka baterií
CS
Nabíjačka batérií
SK
Acculader
NL
Chargeur de batterie
FR
Thank you for choosing a JMP Skan battery charger. The JMP Skan 25.0 battery charger is suitable for daily use for rapid charging
of a battery and as a power supply during diagnostic work and flashing.
Technical data:
12-24 V / 5-25 A, for batteries from 5 Ah to 800 Ah
Dimensions: 280 x 270 x 80 mm, weight: 2.14 kg, mains power cable: 1.90 m, connection cable: 2.10 m
Suitable for:
• Standard lead acid
• Gel
• AGM
• EFB
• Lithium
Safety information:
• Read the instructions for use through carefully before using the charger.
• The charger is intended for charging lead acid, gel, AGM, EFB and lithium (LiFePO4) batteries. It must not be used for any other
purposes. Disposable batteries must not be charged. Do not charge any frozen batteries.
• Battery acid is corrosive. In case of accidental contact between the acid and the skin or eyes, rinse immediately under running
water and consult a doctor.
• When connecting and disconnecting the battery, wear safety glasses and keep the battery away from your face at all times.
• Keep out of reach of children. This device is not a toy and must not be used as such.
• This device should not be operated by people (including children) with limited physical, sensory or mental capabilities, nor by
people without sufficient relevant knowledge and experience if such people are not being supervised and have not received
comprehensive instruction.
• Potentially explosive gases may develop during the charging procedure. As such, sparks and naked flames must be avoided.
No smoking.
• Perform the charging procedure in a well ventilated and dry environment.
• Never place the battery charger on top of the battery during the charging procedure.
• Repairs and maintenance work on the device and mains power cable may only be performed by skilled professionals.
• Improper use of and interference with the device will void all warranty claims.
Scope of supply: :
JMP Skan 25.0 with adapter cable and terminals
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for JMP Skan 25.0
Summary of Contents for JMP Skan 25.0
- Page 1 JMP Skan 25.0 with adapter cable and terminals Thank you for choosing a JMP Skan battery charger. The JMP Skan 25.0 battery charger is suitable for daily use for rapid charging of a battery and as a power supply during diagnostic work and flashing.
- Page 2 Ready for use Selection button / Mode Show Room, 12V, 24V) Selection button / Function (Standard-, AGM-, Lithiumbatterie mit 5/ 12,5/ 25 A, Status • Flashing green: Charging • Illuminated green: Fully charged • Flashing red: Error Adjustable 12 V charging mode: Charging of 12 V batteries, 5 Ah to 100 Ah Trickle charging of 12 V batteries, 5 Ah to 150 Ah Suitable for charging standard and gel batteries...
- Page 3 Adjustable 24 V charging mode: Charging of 24 V batteries, 5 Ah to 100 Ah Trickle charging of 24 V batteries, 5 Ah to 150 Ah Suitable for charging standard and gel batteries 12.5 A Charging of 24 V batteries, 70 Ah to 250 Ah Trickle charging of 24 V batteries, 70 Ah to 360 Ah Suitable for charging standard and gel batteries Charging of 24 V batteries, 5 Ah to 100 Ah...
- Page 4 Trickle charging with pulse current (constantly available). (trickle charge with pulse current) Safety precautions: JMP Skan battery chargers are equipped with protective features to ensure maximum safety during operation and use of the device. • Complete protection against generation of sparks •...
Need help?
Do you have a question about the Skan 25.0 and is the answer not in the manual?
Questions and answers