Problem
Possible Cause
The fuse is
disconnected
The power
does not turn
on
Device is not properly
connected
The system
The vehicle battery is
does not play
low
Countermeasure
• Replace with a suitable fuse
• If the fuse is disconnected
again, please contact
your point of purchase or
Hyundai dealer
• Check to see that the device
has been properly con-
nected
• Charge the battery. If the
problem persists, contact
your point of purchase or
Hyundai dealer
Problem
Possible Cause
• The brightness,
The image
saturation, hue, and
color/tone
contrast levels are
quality is low
not set properly
• The volume level
is set to the lowest
level
• The connection is
Sound does
not proper
not work
• The device is
currently fast-for-
warding, rewinding,
scanning, or playing
in slow mode
• Vibration is occur-
ring from where the
The sound or
conversion switch
image quality
has been installed
is low
• Image color/tone
quality is low
Countermeasure
• Properly adjust the bright-
ness, saturation, hue, and
contrast levels through
Display Setup
• Adjust the volume level
• Check to see that the device
has been properly connected
• The sound will not work
when the device is fast-for-
warding, rewinding, scan-
ning, or playing in slow
mode
• The sound may be short-cir-
cuited and the image dis-
torted if the device vibrates
• The device will return to nor-
mal once vibrations stop
Troubleshooting I 10-5