Qazqa 44191 Instruction Manual page 4

CONTROL DEVICE
After the device is connected successfully, tap
"Device" at the bottom. The device name of the
smart lamp shows in the list. Tap it to enter the
control panel of the smart lamp.
1. White mode: Adjust brightness and color
temperature of white light.
Manually Wi-Fi Select AP Mode
Enter/Confirm Wi-Fi Password Confirm Hotspot
Select Hotspot Connecting
9.
2. Color mode: Adjust color, brightness, saturation
3. Scene mode: Eight scenes modes (4 static & 4
dynamic).
10. 11.
4. Schedule: This will keep the bulb in ON/OFF 5. Grouping: If you got two or more light, please
position for a specific duration of time. tap "..." at the upper right cornor of the control
panel and create group. The smart lamp group
will realize synchronous switch, color changes,
the scene mode selection, timer, etc.
1.
2.
3.
13.
12.
6. Music mode: You can minimize the Tramsmart APP FUNCTION INTRODUCTION
App to play music from any source. Your Smart
Bulb will automatically synchronize and change
Click the interface to control it according to the
color to the music.
specific mode of the specific Smart Bulb. The
following is public function introduction.
Remote control: The Smart Bulb can be controlled
anywhere after the smart device is successfully
Timer function: Set the timer to turn on and turn off the Smart
Bulb.
Intelligent scene: The system sets a variety of intelligent
scenes, and different scenes correspond to different
Group: Group control is available(only for the same
type of product). Family room management.
Device Sharing: The device is shared with other user
control devices in the home.
THIRD PARTY CONTROL
In the Tuya Smart APP: Find more service in "Me"
menu, click to enter "voice service" (Alexa/ Google
Assistant) and other services, click on the service
you need.
Connect to the third-party service device
according to the operation guide.
For any product and APP updating, please contact with customer
service.
14. 15.
16.