Advertisement
Refer to Mounting Template(Item 15)
Lower bracket is not required for 8 feet
ceiling's installation.
This range hood is very heavy.
Two persons are needed to lift the hood
onto the mounting bracket.
.
1. Install the Anti-Vibration Pad (Item 9) to
the rear of the hood body (fig
the backing and stick the sponge strips
(Item 7,8) to the front and sides of the upper
fan housing as shown in (fig
2. Carefully install the hood on the mounting
bracket until it rests on the wall. Make sure
to check that the hood is centered over the
cook-top and between cabinets if applicable
before moving to next step.
3. Install mounting screws as shown in (fig
) to prevent tilting and vibrations.
Install and secure the duct as shown in (fig
Assure that connections are airtight, observe all
best practices, local codes, and regulations for
hood exhaust venting.
). Peel off
).
5 m m
).
10
Advertisement
