1508i(RM-430)
RF Description and Troubleshooting
Nokia Customer Care
Receiver RF Test Points
For the test points in Figure 14, an external signal source of –96 dBm was added to the RF
input. Set LNA GAIN STATE = 4.The signal was then traced throughout the receiver chains.
An Agilent8960 call box is recommended. Set the band and channel as ETS set. Set the cell
power = - 96dBm. Watch the received power of the DSPM Rfc RXTX. Measurements were
taken with the RF Probe. Signal levels are approximate, and the accuracy may be +/- 2 dB or
more depending on the probe position and grounding.
Figure 14: Receiver RF troubleshooting test points
Issue 1
Copyright © 2008 Nokia, All rights reserved