P+L Luralite Cento Instructions

Luralite
Decorative Glueboard Insect Control
Please read these instructions carefully and store in a safe
place for future reference.
LURALITE
As part of the P+L brand of insect control products, Luralite is
an easy to service and highly effective decorative insect
control unit for use within front of house applications. Luralite
utilises highly effective UV tubes and is designed for use with a
high specification glupac™ glueboard. Two sizes of unit are
available - The compact Luralite Cento, (which is available in
four different colour options,) and the highly effective Luralite
Professional.
Contents of package
- 1 x Luralite flykiller
- 1 x glupac™ pheromone impregnated glueboard
- 2 x Screws and wall plugs
- 1 x PL-L compact 18W tube (fitted)
or
- 2 x 15W High powered insect attractive UV tubes (fitted)
WARNING - THIS APPLIANCE MUST BE EARTHED
INSECT CONTROL PRODUCTS
Luralite utilises high powered ultra violet tubes to attract flying
insects and retains the caught insects on a pheromone
impregnated glueboard for inspection or hygienic disposal.
POSITIONING
THIS UNIT IS FOR INDOOR USE ONLY.
Luralite should ideally be fixed around two metres above the
ground, preferably in the darkest place within the area to be
protected and is supplied with a two meter mains lead. Do
not position the unit close to windows, skylights or other
sources of light, or where it may be obscured by furniture,
doors or other obstacles. Ideally, Luralite units should be
visible from every part of the area to be protected.
INSTALLATION
PRIOR TO INSTALLATION, ENSURE THE POWER SUPPLY OF YOUR
MAINS OUTLET CORRESPONDS TO THAT MARKED ON THE
SPECIFICATION LABEL FOUND ON THE FLYKILLER.
Luralite should be fixed to the wall with the supplied wall
plugs and screws. Once installed in position, fit the glupac™
glueboard in position as described in the glueboard
replacement section of this document. Luralite has a plug
fitted to the mains lead and once installed in position, should
be plugged into the nearest mains outlet.
WARNING - THIS APPLIANCE MUST BE EARTHED
USING LURALITE
Luralite should ideally be in operation for 24 hours a day,
ensuring your premises are kept free of flying insects. Insects
are most attracted to Luralite at night when there is no
competition from daylight or other light sources.
CLEANING
ENSURE THAT THE FLYING INSECT KILLER IS DISCONNECTED
FROM THE MAINS BEFORE CLEANING.
It is recommended that cleaning is carried out regularly when
the glueboard is replaced. Once the glueboard is removed,
the unit should be thoroughly wiped down with a damp
cloth, removing any build up of dirt. Ensure the unit is
completely dry before reconnecting it to the power supply.
GUARANTEE
Luralite has a two year guarantee and if maintained as
recommended in these instructions should continue to work
for many years.* Use of non-approved consumables may
invalidate the guarantee. Ensure genuine glupac™
glueboards are used in conjunction with this product.
*Excludes tubes, glueboards and starters. Does not cover breakdown due to misuse,
incorrect operation or use in an incorrect application.
Luralite Cento & Luralite Professional