Inalto IDWD60SS User Manual page 35

PAGE 35
Troubleshooting
TROUBLESHOOTING TIPS
Before Calling For Service
Before calling for service, check the following list for problems probable causes and
what you can do.
Problem
Dishwasher won't start
There is water
remaining in the tub
The wash items are
not clean
Possible Causes
No power.
No water supply.
Kinked or blocked
drain hose.
Clogged filters in
the tub.
Incorrect wash program
chosen.
Obstacle obstructing
the spray arm from
turning.
Loading pattern
too tight
Filters not correctly
in place.
Blocked spray arm.
Insufficient detergent
loaded.
34
INALTO.HOUSE
What To Do
Check that the power cord is
plugged in to a live powerpoint
and it is turned on.
Check that the hose is connected to
a water supply and it is turned on.
Check the drain hose routing.
Check the filters. If they are clogged,
remove them carefully to avoid
dropping anything into the sump
that could cause a blockage.
Select a more intensive program
Check the washload for items
protruding through the bottom
of the basket, or if an item has fallen
through the basket.
Check for adequate spacing
between items.
If either filter is found to be out
of place, also check spray arm
for blockages.
Check that the holes in the spray arm
are all clear. Back flush with water
to clear.
Increase detergent quantity