Inalto IDWD60SS User Manual page 33

PAGE 33
Spray arms
If you are in a hard water area, it is necessary to clean the spray arms regularly for
hard water chemicals will clog the spray arm jets and bearings.
To clean the spray arms, follow the instructions below:
1
One hand raised the basket slightly,
and the other hand reached under
the basket. Hold the spray arm and
lift it up.
3
Wash the arms in soapy and warm
water and use a soft brush to clean
the jets.
After cleaning, replace it in the
opposite direction.
2
Slightly tilt the arm and remove it
from under the basket.
26
INALTO.HOUSE