Summary of Contents for MELAG MELAseal 101 Comfortable
Page 1
During this period, MELAG has succeeded in becoming a leading manufacturer of sterilization equipment. More than 335,000 MELAG units sold throughout the world testify to the exceptional quality of our sterilizers.
® Operating manual MELAseal Installation 1.1. Overview of appliance _______________________________________________________ MELAseal Cutter Mounting provisions for working platform Pressure rail Knob (temperature) Sealing rail Lever with cylindrical knob Signal lamp 1.2. Power cable and pressure lever ______________________________________________ The power cable should be plugged into a safety be inserted in the bottom right or the left bottom side socket with earthing.
Every-day use 2.1. Sealing procedure __________________________________________________________ sealing process both signal lamps (4) light up. After The sterilisation packaging should be placed two to four seconds the lights go out and the between the pressure rail (2) and the sealing rail (3) pressure rail can be disengaged by returning the with the paper side downwards.
then fasten it in place by replacing the screw to the sealing rail and pressure rail at such points, so that left of the rail. heat will not be conducted away from the sealing rail. The consequence will be that the new sealing If a defective sealing rail has to be replaced because rail will overheat and will suffer premature damage it is burnt in places, then the pressure rail must also...
® Operating manual MELAseal Exploded view of appliance __________________________________________________ 19635 17780 19175 17390 10115 16181 58700 26390 12355 10105 14405 20320 24120 39200 DIN regulations 5.1. Width of sealed seams and clear space ________________________________________ German Standard DIN 58953 Part 7 requires that DIN 58953 Part 7 specifies that a clear space of at least 30 mm be left below the sealing border sealed seams in transparent packaging material...
organisms may penetrate the sterile goods A comment on the table in Section 8.2 of the DIN packaging, provided that dry storage conditions standard says: are ensured and the packaging material has the "The information in the table only represents standard required germ-proof qualities, but that when the values.
Need help?
Do you have a question about the MELAseal 101 Comfortable and is the answer not in the manual?
Questions and answers