Summary of Contents for MELAG MELAseal 100 Economic
Page 1
During this period, MELAG has succeeded in becoming a leading manufacturer of sterilization equipment. More than 335,000 MELAG units sold throughout the world testify to the exceptional quality of our sterilizers.
Page 2
1. Installation ..............................3 1.1. Overview of appliance......................3 1.2. Power cable and pressure lever ....................3 1.3. Sealing temperature.......................3 1.4. Wall mounting ........................3 2. Every-day use ............................4 2.1. Sealing procedure........................4 2.2. Packaging cutter ........................4 2.3. Working with packaging rolls ....................4 3. Accessories ...............................5 3.1.
® Operating manual MELAseal 1. Installation 1.1. Overview of appliance _______________________________________________________ MELAseal Cutter Main switch Pressure rail Signal lamp Sealing rail Mounting provisions for working platform Lever with cylindrical knob Knob for temperature regulation 1.2. Power cable and pressure lever ______________________________________________ for use when the signal lamp (6) is no longer The power cable should be plugged into a illuminated.
2. Every-day use 2.1. Sealing procedure __________________________________________________________ Note! If the lever is not pressed down far enough, When the signal lamp (6) goes out you can begin to sealing pressure may not be adequate and the produce seals. quality of the seal can suffer. The lever should not Note: The sealing rail is always hot! be released while the seal is being produced, which Feed...
Page 5
The work platform, which MELAG Art. No. 104 can be attached at the two mounting points (7) at the ® front of the MELAseal Package Sealing Device, 3.2.
Page 6
4. Servicing 4.1. Exchanging the pressing rail _________________________________________________ Note: Let the appliance cool down first to avoid The pressing rail (2) is now visible. Remove the risks of burns. Then disconnect the appliance screw at the right or left end of the rail and taking the from the mains power supply.
Page 7
® Operating manual MELAseal 5. German DIN regulations 5.1. Width of sealed seams and clear space ________________________________________ DIN 58953 Part 7 specifies that a clear space of at German Standard DIN 58953 Part 7 requires that least 30 mm be left below the sealing border sealed seams in transparent packaging material between the sterilisation goods and the seam in should have a width of at least 8 mm.
Need help?
Do you have a question about the MELAseal 100 Economic and is the answer not in the manual?
Questions and answers