Advertisement
Installation
1
Attaching "X" shape support bar
to the connector
□
Attach the "X" shape support bar(B) to the connector(C)
using M6x20 hex bolt(BB) and M6 washers(CC)
□
Tighten all M6x20 Hex bolts(BB) with the M6 socket
wrench(EE)
□ Cover the bolt heads with caps(DD)
NOTE: Please ensure all M6 hex(BB) are aligned and
assembled correctly. Fully tighten the bolts.
B
C
2
Attaching "X" shape support bar
to table top.
□
Attach "X" shape support bar(B) to table top(A) using
M6x40 hex bolts(AA) and M6 washers(CC).
□
Tighten all M6x40 Hex bolts(AA) with the M6 socket
wrench(EE)
□ Attach the bolt caps(DD)
NOTE: Please ensure the blots are assembled correctly
and use the M6 socket wrench(EE) to tighten.
DD
BB
CC
B
A
4
C
DD
AA
CC
Advertisement
