Advertisement
Quick Links
STFV.425211.012-AU-UM rev. 17
GENERAL DESCRIPTION
The EK-WL8-CP/AU is a wireless manual call point
that mimics the feel of breaking glass whilst offering
the user the benefits and environmental advantages
of a re-settable operating element.
An activation indicator drops into view at the top of
the window after the call point has been operated.
The call point can be easily reset with a key and ready
for re-using immediately.
The device is supplied with a mounting kit.
The product complies with the requirements of the
AS ISO 7240.11:2018 and AS ISO 7240.25 stand-
ards.
TECHNICAL SPECIFICATIONS
Communication range with a translator or repeater
Radio frequency
Modulation type
Operating frequency channels
Radiated power
Receiver category (EN300-220-1)
Test transmission message period (typical)
Battery life:
Primary battery (type CR123A)
Secondary battery (type CR2032)
Dimensions (with the base)
Weight
Max tolerated humidity
Operating temperature range
EK-WL8-CP/AU
WIRELESS MANUAL CALL POINT
20.04.2020
1200 m
918-926 MHz
GFSK
6
Not more than 25 mW
1.5
120s
8-10 years
Not less than 3 months
(after primary battery low
fault)
87mm x 87mm x 59mm
170 g
95% RH
From –10 °C to +55 °C
Page 1 from 6
Advertisement
Related Manuals for Incite Fire ekho EK-WL8-CP
Summary of Contents for Incite Fire ekho EK-WL8-CP
- Page 1 EK-WL8-CP/AU WIRELESS MANUAL CALL POINT STFV.425211.012-AU-UM rev. 17 20.04.2020 Page 1 from 6 GENERAL DESCRIPTION The EK-WL8-CP/AU is a wireless manual call point that mimics the feel of breaking glass whilst offering the user the benefits and environmental advantages of a re-settable operating element. An activation indicator drops into view at the top of the window after the call point has been operated.
-
Page 2: General Overview
EK-WL8-CP/AU WIRELESS MANUAL CALL POINT STFV.425211.012-AU-UM rev. 17 20.04.2020 Page 2 from 6 FEATURES • Bi-directional wireless communication • Intelligent algorithms • Tamper switch • 10-year battery life • Self-optimizing wireless frequency and amplitude algorithms GENERAL OVERVIEW The dimension for drilling... -
Page 3: Installation And Testing
EK-WL8-CP/AU WIRELESS MANUAL CALL POINT STFV.425211.012-AU-UM rev. 17 20.04.2020 Page 3 from 6 PROGRAMMING Remove the blocking film from primary battery clips. Wait for about 12 seconds. The “Prog.” button on the call point is used for initializing the device in the system. Please refer to the translator manual for full instructions on how to add a child device to the system. -
Page 4: Analog Data
EK-WL8-CP/AU WIRELESS MANUAL CALL POINT STFV.425211.012-AU-UM rev. 17 20.04.2020 Page 4 from 6 INDICATION AND TESTING The device has a LED which indicates its state according to the following rules: Device’s state LED indication No indication or rare green flashes Standby mode Fault state –... -
Page 5: Battery Replacement
EK-WL8-CP/AU WIRELESS MANUAL CALL POINT STFV.425211.012-AU-UM rev. 17 20.04.2020 Page 5 from 6 BATTERY REPLACEMENT When a battery requires replacement, both batteries must be changed together. a. Open the case of the device. b. Remove the batteries. c. Insert the new batteries as detailed in the installation manual above – take care to observe + / - polarity. - Page 6 EK-WL8-CP/AU WIRELESS MANUAL CALL POINT STFV.425211.012-AU-UM rev. 17 20.04.2020 Page 6 from 6...