Table of Contents
Advertisement
Setup
DISPLAY SETUP
When you open the DISPLAY menu,
you will see the following picture:
"TV Aspect" is used to set the
appropriate display effect when
wide-screen video material is played on
a conventional screen. There are two
options to be selected: 4:3 and 16:9.
When a wide-screen TV set is
connected, you can select "16:9" to get
better view effect.
"Display Mode" can be changed when
you set "4:3" in the "TV Aspect". There
are Letterbox and Panscan to be
selected.
Letterbox: Display the picture of
the cinema effect with the black
bands at the top and bottom of the
screen.
Panscan: Display the picture of the
clipped TV screen. The left and
right edges are cut off.
"TV Output" is used to select the TV
output mode. This player can play discs
recorded in either PAL or NTSC format.
Select NTSC format, when the unit is
connected to NTSC TV.
Select PAL format, when the unit is
connected to PAL TV.
Select AUTO format, the player TV
output format will be according to the
DVD disc format.
Move
Select
In the "Video Output" item, there is
only one video output mode
"S-VIDEO+CVBS".
Advertisement
Table of Contents
