Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.eu P a g e Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 2 Copyright © 2021 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Page 3 G4[QR] User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 5 The general information which helps in performing the operations faster. The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 6: Table Of Contents
5.7 DURESS ALARM SETTINGS ........................56 6 ATTENDANCE SEARCH ......................... 57 7 DATA MANAGEMENT ........................... 60 8 USB MANAGEMENT ..........................62 9 ALARM MANAGEMENT ........................63 9.1 ADD ALARM ..............................63 P a g e Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 7 10.10 AUTO-TESTING ............................. 116 10.11 ADVANCED SETTINGS ......................... 117 10.12 ABOUT THE DEVICE ..........................118 11 USB UPGRADE ..........................119 STATEMENT ON THE RIGHT TO PRIVACY .................... 120 ECO-FRIENDLY OPERATION........................121 P a g e Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 8: Overview
User Manual Overview G4[QR] is a multi-biometric identification terminal that features ZKTeco’s innovative Enhanced Visible Light Facial Recognition and QR Code Scanning technology. The device with the latest technologies can automatically perform recognition at a distance from 0.5m to 3m when a face is detected. It delivers higher recognition quality in speed and accuracy than other terminals using near-infrared facial recognition technology.
Page 9 G4[QR] User Manual Recommended Facial Expression Recommended Standing Posture Note: During enrollment and verification, please maintain natural facial expression and standing posture. P a g e Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 10: Finger Positioning
Note: Please press your fingers onto the fingerprint reader firmly for registration and identification. Face Enrollment During enrollment, stand and focus on the center of the screen. Please face the camera and stand still The enrollment page is shown below: P a g e | 10 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 11: Home Screen
If a Super Administrator has already been registered for this device, other users will need the permission of the Super Administrator to enter the main menu. Drag the icon upwards, to select the attendance status. P a g e | 11 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 12: Virtual Keyboard
G4[QR] User Manual Virtual Keyboard The device supports two types of Keyboards namely English and Chinese. Note: Long press the icon to switch between the keyboards. P a g e | 12 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 13: Verification Modes
Fingerprint/ Password/ Card/ Face verification, the following screen will appear. Select the password icon to open password verification mode. Enter the Password and press [OK]. P a g e | 13 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 14: Facial Verification
In 1:N Face Verification mode, the device compares the acquired facial images with all the facial templates that are stored in the device. The verification screen appears as shown below: P a g e | 14 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 15 If a user has registered a Fingerprint, Password and Card in addition to his/her face and the verification mode is set to Fingerprint/ Password/ Card/ Face verification, the following screen will appear. Select the face icon to enter facial verification mode. P a g e | 15 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 16 G4[QR] User Manual After the prompt "Please verify your face", follow the prompts for face verification. After successful verification, the success message appears as shown below: P a g e | 16 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 17: Fingerprint Verification (Optional)
To open the fingerprint verification mode, simply press your finger on the fingerprint reader. P a g e | 17 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 18 If a user has registered Face, Password and Card in addition to his/her fingerprint and the verification method is set to Fingerprint/ Password/ Card/ Face verification, the following screen will appear. Select the fingerprint icon to enter fingerprint verification mode. P a g e | 18 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 19 Press the finger on the fingerprint reader to proceed with verification. After successful verification, the success message appears as shown below: If the verification is failed, the error message appears as shown below: P a g e | 19 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 20: Card Verification
User Manual 2.6.4 Card Verification 1:N Card Verification Place the registered card on the card reader. If the verification is successful, the message appears as shown below: P a g e | 20 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 21 If a user has registered Face, Password and Fingerprint in addition to his/her card and the verification method is set to Fingerprint/ Password/ Card/ Face verification, the following screen will appear. Select the card icon to enter card verification mode. P a g e | 21 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 24: Main Menu
Once password verification is successful, users can enter the menu. To ensure the security of the device, we recommend registering an administrator the first time you use this device. For detailed operating instructions, please see section User. P a g e | 24 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 25: User Management
[User Management] interface to open the interface to add a user. Add User Details Enter the User ID in the [User ID] field and the Username in the [Name] file. P a g e | 25 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 26 The message "This User ID already exists!" indicates that the ID number you have input is already being used. Please enter another ID number. P a g e | 26 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 27 Tap on the icon to open the camera interface. User should face the lens and then adjust the position. Tap on the icon to take a photo. P a g e | 27 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 28 Fingerprints (optional), or Card number. Select a verification mode that best suits your needs. After setting the User ID, user can set the Fingerprint (optional), Card, Face and Password as following: P a g e | 28 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 29 If you press different fingers onto the fingerprint scanner during the 2 and 3 times, you will be prompted as "Please use the same finger". P a g e | 29 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 30 If the fingerprint is successfully registered, a "Continue to enroll the next fingerprint?’’ dialog box will appear. Tap on [Yes] to register the next fingerprint, or [No] to return to the fingerprint registration interface. P a g e | 30 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 32 Then, tap on [Save]. Note: The user password must be an 8-digit number).Tap on to conceal the password; tap on to make the password visible, as shown below: P a g e | 32 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 33 If the password in both the fields does not match, you have to re-enter the passwords. Delete/Overwrite registered passwords On the User management interface, tap a user in the user list to open the user information page, and then tap on [Password]. P a g e | 33 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 34 Press [Delete]/ [Overwrite] in the dialog window that pops up. Register Face On the user registration interface, tap on [Face] to open the face registration page. Move and adjust your face on the registration area. P a g e | 34 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 36 On the [User Management] interface, tap on a user in the user list to view the user’s information. Once you have entered the “User Information” interface, tap on [User Role] and select [Normal User] or [Super Administrator] in the window that appears. P a g e | 36 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 37 Note: If the field is not found, you need to click System Settings ->Attendance Parameters-> Enable User Validity Settings in the main menu, and the item "User Validity Rule" will appear in the user management interface. P a g e | 37 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 38 G4[QR] User Manual Set the User validity rule. Verification Mode Tap on the [Verification Mode] field on the User information interface. P a g e | 38 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 40: Search A User
User Manual Search a User Tap on the Search bar on the [User Management] interface and enter the keyword(Note: Search the users based on their IDs, Surnames, etc). P a g e | 40 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 43 Edit the required details of the user. Note: The User ID field cannot be modified. For other details of adding the user details, please refer Add User. P a g e | 43 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 44: Delete User
G4[QR] User Manual Delete User On the User Management interface, tap on the button in the upper right corner of the interface. P a g e | 44 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 45 Tap on [OK] (This option can be selected or left unselected based on your requirements). Note: If [Clear attendance record simultaneously] is selected, all the related information of the user will be cleared. P a g e | 45 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 46: Access Settings
The valid value of Door Sensor Delay ranges from 1 to 255 seconds. There are three Sensor types: Close, Normal Open and Normal Closed. Door sensor mode Close: It means door sensor is not in use. P a g e | 46 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 47: Time Rules Setting
"or". When the verification time falls in any one of these time periods, the verification is valid. The time period format is HH:MM-HH:MM in the 24-hour system with precision to minute. P a g e | 47 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 48 G4[QR] User Manual Tap the date on which time rule settings is required. Set the starting and ending time, and then press [OK]. P a g e | 48 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 53 On the “Holiday” interface, tap on the holiday to modify. Delete Holiday On the “Holiday” interface, tap on icon in the upper right corner of the interface. P a g e | 53 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 54: Verification Combination
It is mainly used in some special occasions with relatively high requirements. There can be a maximum of 5 personnel in each group, and a maximum of 10 groups can be set. The interface is as follows: P a g e | 54 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 56: Duress Alarm Settings
After using the duress fingerprint and duress password, the alarm will be delayed according to the alarm delay parameters to achieve the purpose of duress alarm. The specific parameter setting interface is as follows: P a g e | 56 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 57: Attendance Search
The user’s attendance records will be saved in the device, making it easier to find users' attendance records. The users can search for Attendance Logs and Visitor photos. Tap [Attendance Search] in the main menu, and the attendance record appears as shown below: P a g e | 57 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 60: Data Management
Deleting All data, Deleting Attendance photos, Deleting Unregistered user photos, Clearing Admin rights, Deleting user photos, and Deleting wallpapers. Tap on [Data Management] in the main menu. P a g e | 60 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 61 Delete Admin Rights Deletes all the Admin privileges. Delete User Photos Delete all the user photos. Delete wallpapers Delete all the wallpapers stored in the device. P a g e | 61 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 62: Usb Management
Uploads the USB disk content to the device. Download to USB Downloads the data from the device to the USB disk. USB Settings Configure the parameters of USB disk. P a g e | 62 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 63: Alarm Management
It will stop ringing after the alarm time elapsed. Add Alarm On the alarm management interface, tap on to open the “Add Alarms” page. P a g e | 63 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 65 Duplicate-- The default is set to "Only once". To copy the settings to other days, tap on the [Duplicate] button and a window will pop up. Select the date and tap on [OK]. P a g e | 65 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 67 G4[QR] User Manual Tap on [Save] and the alarm will be successfully added. The alarm will be enabled by default on the specified time. P a g e | 67 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 72 G4[QR] User Manual Select the alarm that you would like to delete, and then tap on button on the lower right- corner of the interface. P a g e | 72 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 74: System Settings
The alarm is now deleted and will not appear on the list. System Settings The System Settings maximizes the device's ability to meet the user requirements by optimizing the device’s performance. P a g e | 74 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 75: Network Settings
User Manual In the main menu, tap on [System Settings]. 10.1 Network Settings On the system settings list, tap on [Network Settings] to enter the Network Settings interface: P a g e | 75 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 76: Ethernet Settings
Address and Subnet mask are 0.0.0.0. When the device is connected to the Note network, the parameters such as IP Address and Subnet mask are automatically displayed as set values. P a g e | 76 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 77: Wi-Fi Settings
The ID ranges from 1 to 255. If the system is using the RS232/RS485 communication method, please input the device ID during software Device ID communication. P a g e | 77 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 78: Date And Time
G4[QR] User Manual 10.2 Date and Time In system settings, tap on [Date and time] to enter the date and time settings interface: P a g e | 78 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 79: Date And Time Settings
G4[QR] User Manual 10.2.1 Date and Time Settings Tap on [Set Date] and swipe up and down to set the Year, Month, and Day. Tap on [OK]. P a g e | 79 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 81: Date And Time Format Settings
G4[QR] User Manual 10.2.2 Date and Time Format Settings Tap on [Date Format] and select the desired date format. P a g e | 81 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 82 Sync Cloud Server Time Zone: Enabled by default, and the device synchronizes the time zone issued by the software. Select Time Zone: The default Time zone is GMT + 8: 00. The user can modify as per the actual conditions. P a g e | 82 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 83: Attendance Parameters
Attendance Events are used to record the clock-in/out status. There are 6 default attendance statuses, including Clock-in, Clock-out, Break-out, Break-in, Overtime-in, Overtime-out. The 6 default statuses cannot be deleted or modified. P a g e | 83 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 84 G4[QR] User Manual Add Attendance Events Tap on [Attendance Events]. On the “Attendance Events” interface, tap on to open the “Attendance Event” interface. P a g e | 84 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 86 Note: The maximum length of the name is 24 characters. The status values must be unique and cannot be duplicated. The value ranges from 6 to 250. P a g e | 86 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 90 Tap on [Name] or [Status Value] to edit. Note: The first 6 attendance events cannot be edited. The status values must be unique and cannot be duplicated For further information, see Add Attendance Events. P a g e | 90 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 91 Select an attendance event and tap on the icon on the upper right corner. Note: The first 6 events cannot be deleted, so the delete button will not appear). P a g e | 91 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 93: Status Mode
Timed State Transition: Displays different attendance statuses at different times. Fixed Mode: There is only one fixed attendance mode. Disable Mode: The Status mode will not be used. P a g e | 93 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 94 After selecting the "Timed State Transition" button, tap on the button to set the related parameters. On the Timed State Transition interface, tap on [Check in], then tap on [Repeat Daily]. P a g e | 94 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 95 When the [Repeat daily] option is enabled, the following screen will be displayed. Tap on the [Time] button and swipe up and down to set the time. Tap on [OK]. P a g e | 95 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 96 When the [Repeat Daily] option is disabled, the following screen will be displayed. Tap on the button for the date you would like to set, then swipe up and down to set the corresponding time. Tap on [OK]. P a g e | 96 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 97 After applying the settings, the interface appears as shown below: Note: The settings process for "Clock out", "Break out", "Break in", "Overtime in", and "Overtime out" is the same as "Clock in". P a g e | 97 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 99 User Manual In the Fixed Mode selection menu, select the attendance status that the user would like to set. Disable Mode Select the Status Mode as "Disable Mode". P a g e | 99 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 100: Widget Function Rules
G4[QR] User Manual 10.3.3 Widget Function Rules Tap on the [Execute] toggle button to enable. The main interface will display the attendance status widget. P a g e | 100 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 101: Camera Mode
Save after Successful Verification: When the user verification is successful, the photo is taken and saved. Save after Failed Verification: When the user verification is failed, the photo is captured and saved. P a g e | 101 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 102: Verification Settings
When the remaining record memory space reaches a set value, the Attendance Alert device will automatically display a warning. When the value is set as 0, the function will be disabled. P a g e | 102 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 103: Validity Period Of User Information
This is used to determine if the user validity periods are enabled or disabled when registering the users. Tap on the [User Validity Settings] button. When this feature is enabled, the following screen will display. Configure the desired parameters. P a g e | 103 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 105: Cloud Service Settings
If enabled, the device needs to be restarted to take effect, and Open HTTPS the data is uploaded to the push device. The address is changed from HTTP to HTTPS. P a g e | 105 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 106: Wiegand Settings
G4[QR] User Manual 10.5 Wiegand Settings Tap on [Wiegand Settings] in the system setting list to access the interface as shown below. P a g e | 106 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 108 Note：C is card number, E is even parity, O is odd parity, F is facility code, M is manufacturer code, P is parity position, S is site code. P a g e | 108 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 109: Wiegand Out
The time width represents the changes of the quantity of electric charge with Pulse Width(μs) high-frequency capacitance regularly within a specified time. Pulse Interval(μs) The time interval between two pulses. ID type Supports User ID and Card number. P a g e | 109 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 110: Osdp Output
Serial port address, Baud rate and ID type. 10.7 Display Settings In the system settings list, tap on [Display Settings] to open the display settings page: P a g e | 110 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 112 The clock will be always displayed. The user can choose the favourite wallpaper Customization of Wallpaper from the theme wallpaper interface to Wallpaper and Theme improve the user experience. P a g e | 112 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 113: Sound Settings
This option is used to adjust the volume. This can only be used if audio prompts Voice volume are enabled. It can be set from 0 to15. P a g e | 113 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 114: Biometric Parameters
If the value of the scanned fingerprint exceeds that of the set value, the verification has passes. If it does not, the verification fails. P a g e | 114 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 116: Auto-Testing
Tests if the camera is functioning properly. It also checks to see if the image Camera Test quality is clear and noticeable. P a g e | 116 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 117: Advanced Settings
ADB tool means Android debug bridge tools. It is a command line ADB Network Debug window, which is used to interact with the simulator or real device through the system. P a g e | 117 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 118: About The Device
Platform information, and Manufacturer details. Displays all the versions of all the system's apps, such as the system Version settings, data management, and other installed apps. P a g e | 118 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 119: Usb Upgrade
USB drive contains the correct upgrade file and is properly inserted into the device. Note: If you need to upgrade the firmware, please contact our team. Firmware upgradation is not recommended without any necessity. P a g e | 119 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Page 120: Statement On The Right To Privacy
Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country in which our products are sold.
Page 121: Eco-Friendly Operation
The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 121 Copyright©2021 ZKTECO CO., LTD. All rights reserved.

ZKTeco G4[QR] User Manual

1 Overview

2 Instructions to Use

3 Main Menu

4 User Management

5 Access Settings

6 Attendance Search

7 Data Management

8 Usb Management

9 Alarm Management

10 System Settings

11 Usb Upgrade

Statement on the Right to Privacy

Eco-Friendly Operation

Quick Links

Related Manuals for ZKTeco G4[QR]

Summary of Contents for ZKTeco G4[QR]

Table of Contents